There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.
To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.
Had to wait for the glue on brodys blanks to dry so had a little bit of time and some fun to be had.. panga panga with bodged ca finish.. [emoji35] [emoji24] [emoji107]
And mopane finished with 2 coats friction polish and microcrystalline wax
Shame about the finish Graeme, Ive only had this happen a couple of times and only with Cocobolo, i put it down to the glue not adhering to the wood because it was too oily and it then did what has happened to you when I took the bushings off.
It looked good till pressed kit together.. I think there was a little ca lip where I hadn't noticed a tiny gap where bush had not seated correctly. Gives me an excuse to keep it for myself