• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Help with dyeing and stabilising please

Graham_C

Fellow
Joined
Feb 1, 2017
Posts
1,153
Location
Tywyn
First Name
Graham
I have stabilised a few driftwood blanks and successfully made some pens, but I have a couple of questions.....

In the image below, the top blank has been stabilised using Stick Fast stabilising fluid, in a vacuum pot until bubbles stop, then baked at 90c for 30 minutes. After baking, as you can see, a lot of the fluid seems to have found its way out of the wood - is this normal? The wood is stable afterwards and turns/finishes fine.

In the bottom blank, I used the same process with some violet Stick Fast dye. After vacuuming, the wood is just about grey! After baking, the fluid has also seeped out much the same as the other (I have scraped it off here), and it is a vivid purple colour. When I see Jim's beautiful blanks, it's clear I am doing something very wrong :sob:

Can anyone offer any advice or explanation please? :thumbs:

IMG_2134.jpg
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
To get otherworldly results use the best fluids and good equipment same as Jim. He starts with top known timbers.Graham I know not where Walsall is but its worth a journey to discover more.

Peter.
 

Jim

Grand Master
Joined
Oct 19, 2011
Posts
15,617
Nothing wrong with what you are doing or see with the results Graham, the drying procedure does bring out the juice .. If you would like to see more colour in your blank add a lot more colouring to the juice ..

I normally bake around 200° F for about 30/40 miutes ..
 

Graham_C

Fellow
Joined
Feb 1, 2017
Posts
1,153
Location
Tywyn
First Name
Graham
Thanks Jim, much appreciated. More trial and less error then.....:funny:


Nothing wrong with what you are doing or see with the results Graham, the drying procedure does bring out the juice .. If you would like to see more colour in your blank add a lot more colouring to the juice ..

I normally bake around 200° F for about 30/40 miutes ..
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top