• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

rayberry

Apprentice Member
Joined
Sep 3, 2017
Posts
6
Location
Kings Lynn
First Name
Raymond
Has anyone any idea where I can buy a Venturi here in the UK to be able to create a vacuum from my compressor. Please help.
 

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,304
Location
Somewhere in Staffordshire,
First Name
Eamonn.
You can use your compressor inlet as a vacuum Ray

However if it's a new ish one I would advise using an old one as it can reduce the life depending on the compressor.

I have used the 12v tyre compressors in the past.

But it all depends on what vacuum you need and what your compressor is capable of.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
If the purpose of the vacuum is turning on the lathe I use an old vacuum cleaner with my Vicmark vac attachments. Works great just have to remember to turn off the lathe before the vac.

Peter.
 

rayberry

Apprentice Member
Joined
Sep 3, 2017
Posts
6
Location
Kings Lynn
First Name
Raymond
What I want to do is stabilise old punky wood in a home made vacuum chamber of some kind without spending a couple of hundred quid on a vacuum pump.
 

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,304
Location
Somewhere in Staffordshire,
First Name
Eamonn.
What I want to do is stabilise old punky wood in a home made vacuum chamber of some kind without spending a couple of hundred quid on a vacuum pump.

TBH Ray, many have tried before you and the only way to do it well and successfully is a suitably set up system.

If you search "vacuum" you will find many threads with the same question and I know Bammer has looked in to it including having the correct "cactus juice" is expensive.

In my opinion investing in the equipment and the juice then you may as well go commercial and start to supply the pen turning fraternity.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Using vacuum and compression both have serious standards in industry, what with implosian and explosion , using equipment require you to do further homework. There are many members on this forum can testify to the correct equipment, precautions etc.

I have seen the results from using unsafe systems. It pays to be cautious.

Peter.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
I have one from the University where I worked, two ex refrigeration mechanics efficient compressors I picked up through newspaper ads.

Peter.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top