• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Photograph blanks......

Pastor of Muppets

Full Member
Joined
Dec 5, 2017
Posts
279
Location
Oxford (ish)
First Name
Andy
Hi Guys I have recently seen a few pens that have photographs in the blanks (wrapped around the tube and then cast I assume). Does anyone know who these are available from and what size the photo would need to be for a Sierra style tube?
Cheers
 

yorkshireman

Wood Rat
Executive Member
Joined
Jan 5, 2013
Posts
5,199
Location
wrexham
First Name
Keith
Andy I’m sure this has been discussed some time ago and a few members gluing photos to brass tubes and casting in resin. However I’ve done a quick search and can’t find anything. I would have thought they were fairly easy to make.
 

Sawes

Registered
Joined
Jan 1, 2016
Posts
258
Location
Doncaster
First Name
Scott
Done many of those for various customers with various pictures. Attached one that I did recently.

af482811a4b0aff996df7f053eae7d92.jpg
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Had this one made in America, he made two in one day. For some it is a simple process.

Peter.
 

Attachments

  • DSCF8526.JPG
    DSCF8526.JPG
    56.1 KB · Views: 71

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,301
Location
Somewhere in Staffordshire,
First Name
Eamonn.
As per [MENTION=1298]Sawes[/MENTION] reply. If you haven't got the right equipment just for a one off or if you only plan to do a small amount farm it out.

For finding out the correct size use TT (pi calculation = measure the Diameter and x Pi. (Pi = 3.14.)
 

Sawes

Registered
Joined
Jan 1, 2016
Posts
258
Location
Doncaster
First Name
Scott
As per [MENTION=1298]Sawes[/MENTION] reply. If you haven't got the right equipment just for a one off or if you only plan to do a small amount farm it out.

For finding out the correct size use TT (pi calculation = measure the Diameter and x Pi. (Pi = 3.14.)
Calculation kind of works just a little more to it than that ;)
 

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,301
Location
Somewhere in Staffordshire,
First Name
Eamonn.
Calculation kind of works just a little more to it than that ;)

Sent from my SM-G925F using Tapatalk

Only a matter of getting the pixels right to get the right Diameter and length.. From what I remember when my dad and I did it back in 2007.

Just a Bu@@er getting the picture to seal right or the resin effected the finish of the photo. Modern papers may be different now tho.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
It was a long learning curve.
I now do around 20 in one go and am shipping quite a few each week.

Sent from my SM-G925F using Tapatalk

About page - Mr Resin Blanks
Mr Resin Blanks - Home | Facebook

That was my order but he makes hundreds each week. He is an Airline Pilot for a major Airline who instructs pilots full time. Its not a p.....g competition and buying from America still beats hands down from over here. Really nice guy among so many others. In Australia we have some of the best casters in the world who also work full time. In this forum there are many expert casters with imagination,I admire their work as well.

Peter.
 

Sawes

Registered
Joined
Jan 1, 2016
Posts
258
Location
Doncaster
First Name
Scott
That was my order but he makes hundreds each week. He is an Airline Pilot for a major Airline who instructs pilots full time. Its not a p.....g competition and buying from America still beats hands down from over here. Really nice guy among so many others. In Australia we have some of the best casters in the world who also work full time. In this forum there are many expert casters with imagination,I admire their work as well.

Peter.
Never made it a competition P!$$ing or otherwise. I admire all the work people put in to casting blanks and have learnt and helped so many.
I thought the original post asked for someone who could make blanks must be my mistake.
Use the USA casters is the best advice then.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Never made it a competition P!$$ing or otherwise. I admire all the work people put in to casting blanks and have learnt and helped so many.
I thought the original post asked for someone who could make blanks must be my mistake.
Use the USA casters is the best advice then.

Sent from my SM-G925F using Tapatalk

About page - Mr Resin Blanks
Mr Resin Blanks - Home | Facebook

No I was inferring in the UK use people like yourself over here its cheaper to use USA. The competition refers to between USA and UK and Australia no persons named or involved observations only.

Peter.
 

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,301
Location
Somewhere in Staffordshire,
First Name
Eamonn.
Does anyone know who these are available from and what size the photo would need to be for a Sierra style tube?
Cheers

I thought the original post asked for someone who could make blanks must be my mistake.

Yep, as above Scott, Andy also asked for picture size so thought my comment would help guide him in the right direction, much the same as your reply as well.

As my thread stated, rather than buying all the kit just for a couple then farm it out. Supporting your thread..

Use the USA casters is the best advice then.
misunderstanding there Scott and disagree with your comment.

We have some of the best casters here in the UK, with yours amongst them.
 

Sawes

Registered
Joined
Jan 1, 2016
Posts
258
Location
Doncaster
First Name
Scott
Yep, as above Scott, Andy also asked for picture size so thought my comment would help guide him in the right direction, much the same as your reply as well.

As my thread stated, rather than buying all the kit just for a couple then farm it out. Supporting your thread..


misunderstanding there Scott and disagree with your comment.

We have some of the best casters here in the UK, with yours amongst them.
Does seem there was some misunderstanding regarding the term p###ing competition.

Your comment regarding picture size only leaves out a slight calculation for the paper thickness depending on choice of adhesive etc. The diameter to circumference will get close but will fall ever so slightly short if used to the letter.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top