• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

All in Black and White

Unique

Registered
Joined
May 7, 2017
Posts
251
Location
Kent
First Name
Tony
Spent a bit of time today constructing some polymer clay blanks. Not made any of them in the past couple of years, but nice to spend some time doing these and am reasonably pleased with the outcomes.
Not sure yet whether I'll just turn, sand and CA them or to clean them up and resin coat them?

Two batches of six- using just black and white on Sierra/Sirocco tubes. Also another six pairs (not shown) grey and white on 7mm tubes.

First six:
IMG_20180325_161001551_BURST000_COVER_TOP.jpg IMG_20180325_161046795_BURST000_COVER_TOP.jpg

Second six:
IMG_20180325_161146375_BURST000_COVER_TOP.jpg IMG_20180325_161240474_BURST000_COVER_TOP.jpg

Tony
 

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,159
Location
Maidstone
First Name
mark
Ooh err Mrs!!

Looks exciting stuff Tony. Not enough polymer clay around here - looking forward to seeing the results.

I nicked that word 'penerised' from Mik Lawrence:thumbs:...but have to agree we need more Polymer Clay....:banana:
 

Unique

Registered
Joined
May 7, 2017
Posts
251
Location
Kent
First Name
Tony
Ooh err Mrs!!

Looks exciting stuff Tony. Not enough polymer clay around here - looking forward to seeing the results.

Thanks Phil - well I have a bag load of ideas around this and going to be working on getting them put into practice - along with my other ongoing projects.

One question, when cleaned-up is it worth popping them in to resin as opposed to using a CA finish (which I've done in the past)? Thoughts welcome!
 

Unique

Registered
Joined
May 7, 2017
Posts
251
Location
Kent
First Name
Tony
They look great Tony.
This Polymer clay is great stuff to work with.

Hi Paul - I agree, it was your video that spurred me on to have another go at working with this again - (I did a few pens a couple of years ago).
I'll put some more up when theyre done

Tony
 

Unique

Registered
Joined
May 7, 2017
Posts
251
Location
Kent
First Name
Tony
Hi and welcome Colin .

Tony these blanks are amazing and the WOW factor is high with impact and great promise.

Peter.

Thanks Peter, Now have to turn the promise into reality - later today or maybe tomorrow to move these on - and another small (different) batch to be made up.
Photos will follow.

Tony
 

Unique

Registered
Joined
May 7, 2017
Posts
251
Location
Kent
First Name
Tony
Great looking Blanks Tony.:thumbs: I finish polymer blanks with acrylic lacquer.

Thanks Bill - I think that I have a can of that so will give it a try.Will have to wait a couple of days now as my lathe motor died today (the machine is only 4 months old) and am awaiting replacement parts - hopefully before Easter!!

Regards
Tony
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top