• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Pressure pot

Burt25

Full Member
Joined
Apr 29, 2016
Posts
147
Location
N Ireland
First Name
Ian
Looking for recommendations for a pressure pot to get started with casting. Also has anyone on here converted a paint pressure tank for this purpose?
 

fortress

Registered
Joined
Apr 11, 2016
Posts
5,178
Location
Astley
First Name
John
Hi Ian, I cast all the time, I only use Polyester resin, therefore I have no need for pressure pots. The question is what kind of resin do you want to cast with? If you want to cast with something that needs one, I wouldn’t fool around with conversations, I would buy something that is specifically made for that purpose IMHO. :thinks:
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Like that famous lady said first slaughter your ox. Consider the various options,look for fellow Pen people in Nthn Ireland. Buy cast blanks that use differing chemistry. Read our Library and the one in the IAP. Their must be oodles of U Tube vids on the subject.

Top consideration they are pressure vessels designed for the purpose and deserve and command respect as such. Consider deeply the pros and cons.Have fun along the way Ian.

Peter.
 

Burt25

Full Member
Joined
Apr 29, 2016
Posts
147
Location
N Ireland
First Name
Ian
Thanks guys for the advice so far. To be honest if I can get away with not needing to buy a pressure pot then Im happy to look at options. How do you find the polyester John? - Are you able to get bubble-free results?

I have read on the Alumilite website that their product can be used with either pressure or vacuum (vacuum before mixing the 2 parts). Can anyone advise how effective vacuum is in removing bubbles? I ultimately want to make my own blanks for custom kitless pens so material must be threadable and able to take a really good finish.
 

fortress

Registered
Joined
Apr 11, 2016
Posts
5,178
Location
Astley
First Name
John
I use .easycomposites.co.uk that is clear Polyester resin. Easy to mix providing you use the right radio. No bubbles and water clear. No need for pressure pots or vacuum pots. :thumbs:
 

Ray7756

Full Member
Joined
Dec 4, 2017
Posts
198
Location
Kirkmichael Scotland
First Name
Ray
I use .easycomposites.co.uk that is clear Polyester resin. Easy to mix providing you use the right radio. No bubbles and water clear. No need for pressure pots or vacuum pots. :thumbs:

Hi John
Do you follow the procedure that is posted in the tutorial section on here ????
Or have you worked out your own method ???
Cheers
Ray
 

Bammer

Fellow
Joined
Oct 5, 2015
Posts
1,482
Location
Cambridge
First Name
Brad
Casting PR without much equipment is possible.
Temperature and Humidity play an important role in the curing. Easier to cast in the summer than winter.

You can warm to resin to allow bubbles to rise more easily. Stand the mold on something that vibrates like a scroll saw can help the bubbles rise.

Don't stir too too fast creating more bubbles.

And don't try this inside the house unless you want a slap off your wife .... It really does stink
 

fortress

Registered
Joined
Apr 11, 2016
Posts
5,178
Location
Astley
First Name
John
Hi Ray,
I do use mica power to colour, and I have watched tutorials on YouTube and posts on the forums.
Usually the website where you buy the resin has a chart for mixing ratio, and on the tin. I’m afraid it’s a case of trial and error.
When I first started mixing My blanks were too brittle to turn it was very frustrating. But in the end, once you have it right it’s all worthwhile. I hope this will help you, remember I only use Polyester resin Myself. :thumbs::thumbs:
 

ChrisH

Full Member
Joined
Feb 17, 2016
Posts
14
Location
London
First Name
Chris
I've used the polyester resin from easycomposites and it gives perfectly clear and bubble free results.
BUT it is very brittle and chips/cracks easily.
I preheat it and cure it in a seed propagator which keeps it at around 20 oC
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Like the seed propagator, also useful is the artificial heat rock it has only an 8watt element,is fully controlled. They the Lizard people don,t like overdone Lizards.

Peter.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top