• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

electricsub

Apprentice Member
Joined
Apr 25, 2017
Posts
7
Location
Ayrshire, Scotland
First Name
Bob
Hi All,
Complete newby to woodturning - based on Ayrshire coast - Scotland.
I have just retired at 73 yrs old :thumbs:& decided to take up woodturning - initially pens/pencils
I have a Jet JML 1041 which I hope to be using for the pen work.
Having said that it doesn't have a chuck & I am not sure of the Headstock tread for chuck, but I think it's 1" not sure on number of threads - can anyone please advise ??


Looking forward to try & participate - but only as newby
Regards
Bob
 

fortress

Registered
Joined
Apr 11, 2016
Posts
5,178
Location
Astley
First Name
John
Hello and welcome Bob, I think your lathe may have 1" X 8tpi thread according to the WWW. This forum is a great place for new and old turners alike, enjoy.
 

yorkshireman

Wood Rat
Executive Member
Joined
Jan 5, 2013
Posts
5,199
Location
wrexham
First Name
Keith
Welcome Bob mate. I used a jet 1014 for a while - still got it -it's a great little lathe
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Morning here Bob, I have been retired for twenty years now, recommend highly you follow your instincts with pen making. In my 83rd year and love my workshop, enjoy this forum, welcome from over here.

Peter.
 

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,301
Location
Somewhere in Staffordshire,
First Name
Eamonn.
Hi All,
Complete newby to woodturning - based on Ayrshire coast - Scotland.
I have just retired at 73 yrs old

Someone has to live there Bob:winking:

Anyway, Old, at that age it puts you amongst some of the youngest on here:wink: so I would say 73 yrs young. But don't tell anyone I said that on here as they get a bit grumpy..:funny:

Having said that it doesn't have a chuck & I am not sure of the Headstock tread for chuck, but I think it's 1" not sure on number of threads - can anyone please advise ??

Yes I think it's 1" 8tpi Bob, just need to confirm that before you shell out, which as a living in Scots country you will do the Scott's tradition proud and check, check and check before you spend anything..

But yes you will get an adaptor for that easily for most chucks on the market.

Looking forward to try & participate - but only as newby
Regards
Bob

It's no matter if you are a newby here, we all have a break away from it and feel like a total plonker never mind newbie.
Sometimes I stand in front of the lathe and think "WTF have I done that for" :goesred:

Enjoy your new found skills and look forward to seeing some pens.
 

Harry

Full Member
Joined
Aug 18, 2014
Posts
183
Location
Dunfermline
First Name
Harry
Welcome Bob, from a fellow Scot, living in Fife but raised as a Weejie. I've been retired for a couple of years now, but I didn't wait as long as you have:goesred:
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Since 1955 wTF for me means what the folly, I came back from full time Army asked me Mum to pass the F butter, a nasty moment I must have mumbled cause neither my Mum or Dad stirred, but lesson learned. Anyway however you dress it I felt familiar with your expression.

Peter.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top