• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Superbike_2

Apprentice Member
Joined
Sep 2, 2018
Posts
4
Location
Durham
First Name
James
Hi everyone,
James from Durham here. Just started turning this year and quite interested in pens. Made 3 so far, (all slims) one under instruction, and two on my own. The one under instruction turned out better than the other two, but hopefully with some practice they'll be flying off the lathe! Must order some more kits!
cheers:banana:
 

Morse

Graduate Member
Joined
Dec 20, 2016
Posts
679
Location
Cheshire. UK
First Name
Dave
Welcome James.
I think there are a few on this forum from Durham.
Ask away on anything your not sure of, you’ll get plenty of advice.
Have fun.

Dave
 

fortress

Registered
Joined
Apr 11, 2016
Posts
5,178
Location
Astley
First Name
John
Hello and welcome James, we’ve all been there, and that’s where it starts, one small pen for man....lol :thumbs::banana:
 

JerseyBill

Full Member
Joined
Jun 21, 2018
Posts
169
Location
Jersey, Channel Isles
First Name
Bill
Welcome James. Like all addictions it starts with just one and then, before you know it, you have been smitten. Fortunately this one is fairly harmless ....... usually! :thumbs:
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,455
Location
Colebrooke, Devon
First Name
Phil
Hi James - welcome to the fold. I hope you enjoy your new hobby, but be warned - it's a pretty deep rabbit hole you've stepped into.
 

Superbike_2

Apprentice Member
Joined
Sep 2, 2018
Posts
4
Location
Durham
First Name
James
Ah wow, Thanks everyone! Yeah I had some issues with torn grain towards the end of the end of the tubes, and not sure what is causing it.... blanks were Sapele and Meranti. Might have another go today with the walnut and see if a more closed grain wood makes a difference. Also think i'll try drilling the holes on the lathe as there was a bit of slop in the holes drilled on pillar drill.
 

Lons

Fellow
Joined
Dec 17, 2013
Posts
4,753
Location
Northumberland
First Name
Bob
Welcome aboard James, I'm not a million miles away in Northumberland but your best bet if you need expert advice and help is Bill Mooney who's probably not far from you.
He's a great bloke with a wealth of experience and knowledge which he's always happy to share.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top