• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

New member say hello

jiminfife

Apprentice Member
Joined
Mar 8, 2019
Posts
6
Location
Lochgelly, Fife
First Name
jim
Hello everyone

I am new to turning, i have always enjoyed playing around making things with wood and when a lathe came up on a local selling site i thought why not, i have been practising and learning using a dvd that came with the lathe of jimmy clewes and youtube, i have tried a couple of pens and find i quite enjoy it, relatively quick to do so i don't upset the other half by disappearing into my workshop for hours on end, i have tried enrolling on a coarse at the local community centre but they are booked up, so looks like im going to have to learn the hard way and make mistakes, any hints tips and advice would be most welcome.

Many Thanks
Jim
 

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,159
Location
Maidstone
First Name
mark
Welcome along mate.....we all started somewhere so ask away......there's no such thing as a stupid question, but I can't say that about the answers:wink::wink:
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,455
Location
Colebrooke, Devon
First Name
Phil
Hi Jim - welcome to the fold. If you can't enrol for lessons, is there perhaps a woodturning club near you? They are usually a good source of information and guidance
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Hi Jim - welcome to the fold. If you can't enrol for lessons, is there perhaps a woodturning club near you? They are usually a good source of information and guidance

+1 for what Phil says look for a club or if you can find a turner near you who is prepared to show you the basics.

By the way, welcome to the forum and as Flexi (Mark ) said no question is silly.
 

AllenN

Fellow
Joined
May 20, 2013
Posts
2,242
Location
Lancaster, UK
First Name
Allen
Welcome to the forum Jim. Loads of good advice on here. A club is a good idea but there are some good teachers on You Tubetoo. I would recommend Sam Angelo the Wyoming Wood turner, he is an excellent teacher. From the UK Mike Waldt is very good and has ideas covering the basics as does Sam. I also found videos by Brian Havens which explain the theory of why certains cuts are used.
For books I found Walter Halls book on turning pens very helpful when I started, Walter will probably be along in a minute as he is on this forum. For more general turning Richard Raffans books are hard to beat in my humble opinion. These can all probably be obtained from your local library and turn up from time to time on ‘t’bay and Amazon. Have fun learning and never be afraid to ask.
 

martin.pearson

Full Member
Joined
Nov 2, 2017
Posts
223
Location
Balingry Fife
First Name
Martin
Welome to the forum Jim, I am pretty new here as well but if your in Lochgelly then you are just round the corner from me. I live in Ballingry but have a workshop in Cowdenbeath.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top