• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

hello, new to this, simon

simon1138

Registered
Joined
Dec 28, 2019
Posts
1
Location
hampshire
First Name
simon
hello,
i am simon from portsmouth, i would like to make a cigar style pen from wood. my dad has a hobby metal lathe that i was thinking about using. i would like to make parts rather than buy a kit. is there a post that shows how to make a mandrel and bushes?
thanks
simon
 

alpha1

Fellow
Joined
Mar 29, 2018
Posts
1,175
Location
middlesbrough
First Name
Dave
All the kits have different size bushings and they are cheap to buy. Mandrels are 7mm in diameter just buy a piece of 7mm bar stock and cut it to lentgh. Hold one end in the chuck you wil need something in the head stock to support the other end. The bushings go on the mandrel to supprt the blank whilst you turn it.
To be honest by the time you purchase the materials and take into account the time to make them its cheaper to buy a mandrel and bushings. I use a metal lathe to make pens by the way.
 

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,159
Location
Maidstone
First Name
mark
Hi Simon, welcome aboard....if you don't want to use kit parts then a mandrel and bushes are redundant..... you will need some other expensive tap and dies to go 'kitless' Though, if this is a one-off I would use a better quality kit, or at least adapt one.:thumbs::thumbs:
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Since I only ever have turned one piece or 1/2 pieces at a time,early days I used to buy long machine bolts trying the various ones until I found a neat slip fit.,yes I used to make mandrel savers,bushes etc why not whatever floats your boat.

Having bought and refurbished so many machines of all sizes and uses my wife said onetime she thought I enjoyed this so much it would be a let down maybe to turn pens.

Quite frankly what passed as pen lathes were just rubbish in the 70,s I made my own lathe.

Peter.
 

21William

Fellow
Joined
Jan 21, 2016
Posts
1,618
Location
Dorset
First Name
William
Welcome Simon.
Some pen mandrels are not as good as they could be and often cost more than they need to. I bought an ER25 collet chuck for about 6 or 7 pounds on eBay. I bought a 7mm collet for it and also some 7mm silver steel rod. I then bought a pen centre from Chronos. SCT Pen Centre

Bushes if required are easily made on a metal lathe.

Making straight cuts in wood or acrylic on a manual metal lathe is a simple process using the existing tool post. A good tool to use are polished 6mm carbide profile inserts. If you want to make smooth curves though you will ideally need to make a tool rest to enable you to use hand held tools.
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,455
Location
Colebrooke, Devon
First Name
Phil
Hi Simon - welcome to the Forum

As Mark saysw if you're making a pen from first principles, it's actually a whole raft of different tools you'll require - in fact anything but a mandrel. You'll need to consider alternative work holding methods, not to mention the need to form threads in at least 3 different places. Pen mandrels are only any use if you're making a pen from a kit.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top