• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Painting Inside The Blank

Jim

Grand Master
Joined
Oct 19, 2011
Posts
15,617
How do you do it? I use nail polish and ear buds at the moment, but find this to niggly .. Hoping to find a better solution .. :praying:
 

Jim

Grand Master
Joined
Oct 19, 2011
Posts
15,617
I would prefer Bills answer to this problem simply using marker pens.

Peter.

Inside the blank Peter, not the tube. Also since reading Bill's tip i also now use his method .. It is so much easier and does the trick .. :thumbs:
 

Bigblackdog

Registered
Joined
Dec 28, 2014
Posts
839
Location
Leeds
First Name
Mark
ear buds and acrylic paint for me. I bought a tube of black and white from ebay- probably kids paint I think, but it was cheap at a couple of quid.

Do you also paint the tubes Jim? I have tended to do one or the other, but get better results with doing the inside of the blank rather than just the tube.

I had wondered about nail varnishing the tube. I tried the marker pens and that worked ok. The downside of painting the blank is that it normally needs 2 coats, so i have to be even more organised to do a batch. cut blanks to size and drill, a coat of paint at night, a coat before going to work, then glue, wait and turn. This pricess can take me a couple of weeks or more due to available time in the workshop.
 

edlea

Lobbygobbler
Registered
Joined
Aug 1, 2013
Posts
4,693
Location
Blackpool
First Name
Ed
I use spray paint on the tubes only .The only time I tried to paint the inside of a blank was a disaster..refer back to my recent post on the grey mesh Sierra from last week.
 

billyb_imp

Registered
Joined
Mar 2, 2014
Posts
4,298
Location
Lincoln, UK
First Name
Billy
I tend to give a quick squire from the paint can or air brush down the tube, to much of a squire and you end up with far to much and the tubes won't slide in :whistling::whistling:
 

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,304
Location
Somewhere in Staffordshire,
First Name
Eamonn.
When I do pain inside the blank it's Cotton wool buds Jim, I agree it is fiddly but works for me.

Having said that recently I tend to mix some paint with the Epoxy glue and find no need to pain TBH.
 

Buckeye

ペンメーカー
Executive Member
Joined
Oct 15, 2013
Posts
9,697
Location
UK
First Name
Peter
I spray when I have black spray and use black acrylic paint with a cotton bud or brush. I have been thinking if I paint tube and hole, can I insert tube and not use glue?

Peter
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top