• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Band saw help

Winemaker

Registered
Joined
Oct 7, 2014
Posts
2,059
Location
Cornwall
First Name
Tom
I have a Scheppach hbs 20 bench band saw all worked well, had to put in a new blade no problem, followed the instructions fitted fine worked ok :thumbs:. I have only cut a few bits with the new blade, now when I cut anything thick or thin the cut goes to the right. So I take off the blade and refit it still cuts crooked :sob:, I have adjusted every thing again still the same anyone out help me please :praying:
 

bigbob

Graduate Member
Joined
Oct 31, 2014
Posts
557
Location
Inverness
First Name
Bob
They are not cheep Markk specially the little add on for the thin blades to make jewelry boxes etc
 

Scots Bill

Registered
Joined
Feb 2, 2016
Posts
905
Location
North Yorkshire
First Name
Bill
Well Big Bob, that u tube thing with Alex Snodgrass certainly taught me a few things, and goes to prove, practice makes perfect, what speed that man works, phew!:sob:
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Tom sometimes the join on the new blade can be crooked or lumpy.
The alignment to the wheels is critical, by that I mean the both wheels should be parallel.

The alignment of the guide wheels above the table and below . Ensure the below guides are clean and closely aligned.

Peter.
 

Scots Bill

Registered
Joined
Feb 2, 2016
Posts
905
Location
North Yorkshire
First Name
Bill
Can someone tell me how to save the likes of that video. I am on windows 10. and how do I save a picture. I right click, then the list of options baffles me. hard to learn I find at my age, if I ever could.:thinks:
 

wm460

Grand Master
Joined
Mar 16, 2013
Posts
23,095
Location
Tennant Creek, Northern Territory, Australia.
First Name
Mark

bigbob

Graduate Member
Joined
Oct 31, 2014
Posts
557
Location
Inverness
First Name
Bob
Can someone tell me how to save the likes of that video. I am on windows 10. and how do I save a picture. I right click, then the list of options baffles me. hard to learn I find at my age, if I ever could.:thinks:

Hi Bill on windows 10 you can save as a URL by right clicking on the video then you can save in any folder of your choice but the easiest way is if you hover your mouse over the lower left at the botom of the video you get the option to watch in utube if you click this option it opens in an other tab on a utube site you then simply save this as a favorite
 

Jim

Grand Master
Joined
Oct 19, 2011
Posts
15,617
I have had this happen when i used the blade that came with my bandsaw Tom, changed the blade to an Excalibur one which solved the problem .. :thinks:
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
My experience also buy a decent blade I buy the hardened teeth variety long life and hard work in the burls a breeze.

But I still do the real set up every new blade and check out the feed alignment and bearings. The especialy the dust extraction as I often cut Aluminium.

Peter.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top