• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Plan for pen stand

Woody

Woody

Registered
Joined
Jul 12, 2013
Posts
12,812
Location
at home
First Name
no
A few people have ask me for the plans of pen stand I made the other day I used 1/2" corian but there are plenty of other suitable materials I drilled 10mm holes before I cut it out for the pen slots in the top but this can be adjusted for any pen size also seeing as some may not be happy with but joints I use 5mm brass dowling drilled the top and bottom out before cutting the drilled to the required depth into the back plate after assembly I hope this is of help to some of you
DSCF3750.JPGDSCF3753.JPGDSCF3752.JPG
 
Scots Bill

Scots Bill

Registered
Joined
Feb 2, 2016
Posts
905
Location
North Yorkshire
First Name
Bill
You must have read my mind Vic, good show, must get to that. I did get my son to make the bottom holes for slimlines with a tile or glass drill, near perfect fit. He also makes pens when he is finished work. I do like that stand.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top