• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

What else is required or recommended?

DaddyG

Full Member
Joined
Dec 11, 2017
Posts
127
Location
Redcar
First Name
Graham
My lathe, chuck, pen jaws, Jacobs chuck, mandrel starter set and micro mesh are in to the shop on Tuesday. (but can't collect till Saturday!!!!?)

I already have my carbide tools, medium super glue and activator.

Turners sanding pack and face shield and a few pen blanks ordered.

Will I need any other super glue or will medium be enough.

The only thing am unsure what can I use to polish or is micro mesh on ca finish.

Am also looking for a polish for acrylics and an alternative finish for wood blanks.

Thanks in advance .
 

21William

Fellow
Joined
Jan 21, 2016
Posts
1,618
Location
Dorset
First Name
William
A couple of things spring to mind.

Cellulose sanding sealer is a good base for most woods. Chestnut Cellulose Sanding Sealer - Fillers & Sealers - Abrasives, Cleaners & Finishing | Axminster Tools & Machinery

On the assumption that you’ve already got some drill bits to use in the Jacobs chuck you’ve ordered you could do with a centre drill or two for starting holes accurately. CENTRE DRILLS

A basic face mark when sanding wouldn’t go amiss. Elipse P3 Half Mask Respirator - Yandle & Sons Ltd
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
I would go for two part epoxy glue as it is better for glueing in the tubes to the blanks. There is a PDF on how to apply Melamine lacquer instead of using CA as many are now going over to this method in which case sander sealer as already mentioned and melamine lacquer
 

DaddyG

Full Member
Joined
Dec 11, 2017
Posts
127
Location
Redcar
First Name
Graham
Cheers missed of face mask off my list so that's sorted, will look into sanding sealer and what finish could I apply over the sealer preferably an easy one till I get the hang of it all!!!
 

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,159
Location
Maidstone
First Name
mark
I would go with Gorrilla glue (pu) for tubes and i use a silicone sealant nozzel to hold and poke the tubes in with. I also use Farclea car polish as a final polish ( i stopped using micro mesh ) just remember to remove abraisive dust between grits and sand laterally as well as radially....
 
Joined
Dec 14, 2017
Posts
1,105
Location
Lake District
First Name
Craig
As daft as it may seem, I would consider adding a smock or similar garment to your list. Leave the majority of the dust in the workshop and not in your house. From personal experience, your better half might get a little upset if you you don't.

Regards

Craig
 

Paul hd

Fellow
Joined
Jun 12, 2016
Posts
1,299
Location
Buckinghamshire
First Name
Paul
As daft as it may seem, I would consider adding a smock or similar garment to your list. Leave the majority of the dust in the workshop and not in your house. From personal experience, your better half might get a little upset if you you don't.

Regards

Craig

This is a great tip.
I have just got one and it is a fantastic addition. I got mine from the tool post and it is brilliant quality.
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,455
Location
Colebrooke, Devon
First Name
Phil
Not necessarily a suggestion for other equipment you need, but definitely something to help you decide what else you might need, (and particularly if you are new to pen making) - is the book by [MENTION=95]Walter[/MENTION] Hall.

"A Complete Guide to Turning Pens & Pencils"
Taunton Press
ISBN978-1-60085-365-4

He's too modest to mention it himself, but it is one of the leading books on our craft and will help you in all aspects, including the gear you need to acquire in order to get started.
 

AllenN

Fellow
Joined
May 20, 2013
Posts
2,242
Location
Lancaster, UK
First Name
Allen
One thing I do not see is any mention of measuring equipment. I would get some calipers because you cannot really just rely on things being the correct size. I second Walter’s book, I found it a great help.
 

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,301
Location
Somewhere in Staffordshire,
First Name
Eamonn.
Another one here for agreeing with Walters book..

A picture says a 1,000 words..

Here is a picture that I know may be of interest for a starter setting out turning.

penturning tool and equipment.jpg

I always find drill gauges a must, that way you can check and double check what size drill you have against the tube being drilled.

With everything in this pic you should be able to turn pens. (I must label it all up at some point)

The only thing you need to think of from whats in the picture is managing the dust and vapors, but starting out with a decent dust / vapor mask and a hoover in the shed to clean it all up would be good.

Being aware of dust and vapors in the air when you are using the lathe and adhesives, making sure you are aware of what woods can cause you problems. Superglue (CA) is renowned for causing problems.

This pic was one my grandson did for a presentation to his school when he did a talk on pen making so he could talk through the items on there..
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Just noticed a super flexible suitable light in Ikea,s latest catalogue for 9.00 dollars our money. Really like Eamonns layout,I do not have Walters book so not in a position to comment.

Peter.
 

DaddyG

Full Member
Joined
Dec 11, 2017
Posts
127
Location
Redcar
First Name
Graham
Thanks everyone, especially silver for that photo I am now going to convert one of my silicon guns into a pen press.

I already have a flexible light and measuring calipers.
 

21William

Fellow
Joined
Jan 21, 2016
Posts
1,618
Location
Dorset
First Name
William
Forgot to mention, some folks are using Melamine lacquer as an alternative to CA with good effect.
 

DaddyG

Full Member
Joined
Dec 11, 2017
Posts
127
Location
Redcar
First Name
Graham
Also just checked and that's the book I have ordered thanks Phil. Here tomorrow so can read up before I get set up at the weekend!!!

Am going to leave the melamine finish for a bit as I would need to buy that plus the sealer and thinners!!!

Banks taking a hammering with the lathe and bits n bobs so will hold off on the alternative finishes, practice the ca finish first.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top