• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Getting ready

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Well after finishing the last two pieces I posted today I thought I would start by cleaning some blanks ready to rough turn and start on the top part of another project but when i started to turn that piece I decided to use it for something else and then the second piece was some green Oak which also showed signs of being promising and as I wanted something I could colour they are now going to be other projects.
I did manage to take some photo's of the two round blanks and the last three photo's of the first piece I turned from the project.
 

Attachments

  • DSCF8995 (800x527).jpg
    DSCF8995 (800x527).jpg
    118.9 KB · Views: 54
  • DSCF8996 (800x600).jpg
    DSCF8996 (800x600).jpg
    126.2 KB · Views: 55
  • DSCF9002 (800x600).jpg
    DSCF9002 (800x600).jpg
    113.6 KB · Views: 54
  • DSCF9003 (800x600).jpg
    DSCF9003 (800x600).jpg
    116.6 KB · Views: 54
  • DSCF9004 (800x600).jpg
    DSCF9004 (800x600).jpg
    103.5 KB · Views: 53
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top