• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

bonding brass to wood

martin.pearson

Full Member
Joined
Nov 2, 2017
Posts
223
Location
Balingry Fife
First Name
Martin
Not sure if anyone in here can help but it doesn't harm to ask & I know people will do other things apart from turning pens lol

May have a job where I would like to inset a brass square (100mm) into the top of a post, I can pocket the top of the post out easy enough so the brass plate sits flushbut don't really want to use mechanical fastenings for security & overal looks.
The posts will be either larch or Oak & obviously the brass plate will be bonded to end grain, these are for external use so out in the open.

So just looking for thoughts on what might be a good adhesive to use under the circumstances
 

Terry Q

Fellow
Joined
Oct 8, 2014
Posts
3,847
Location
Roanoke, Illinois USA
First Name
Terry
For outside applications I like to use exterior latex caulk. Rough the glue side a little to give it some tooth. Apply an even coat and press firmly in place.

Gorilla glue will also work but you will have to clamp it in place while the glue dries.
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
How big is it and does it have any form of load. So what is it for or is it purely decorative
 

martin.pearson

Full Member
Joined
Nov 2, 2017
Posts
223
Location
Balingry Fife
First Name
Martin
The brass squares re 100mm x 100mm x 5mm, posts are 150mm square, the brass parts will be set into the post tops so they are flush. These are rubbing posts, they are for a nature trail, the posts will be set in the ground at certain places around the trail so no loading what so ever on here the brass is joined to the post, it's just so you can do a brass rubbing as you walk round the nature trail, ere will be woodland animals on the brass for brass rubbing.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Pics please to complete the request. Nothing to open up the inserted end to give a greater overall bonding of the chosen glue. Glue designed for airo space purposes these vdays are amazing.

Peter.
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,455
Location
Colebrooke, Devon
First Name
Phil
^^^ What Peter said. Two part epoxy for me. Rain proof, cold proof, heat proof, bomb proof and ideal for metal to wood applications.
 

Lons

Fellow
Joined
Dec 17, 2013
Posts
4,753
Location
Northumberland
First Name
Bob
+1 for Sikaflex though there are several different types, I've used it a number of times to bond plastic to metal, aluminium to glassfibre ( just yesterday to fit a DAB aerial / alu plate on to my motorhome roof) and years ago to fit a heavy glassfibre spoiler to the boot lid of my BMW which I drove for 12000 miles without issue.

There are several other makes just as good, I've also used this one Stixall Extreme Power - Ultimate combined building adhesive and sealant hybrid - 290ml - Black: Amazon.co.uk: DIY & Tools black but clear and other colours available. All are polyurethane based and waterproof but you would probably need to seal the wood before fixing as the adhesive works best on non absorbent surfaces.

It grabs very quickly and you have little working time which is good for that type job but the adhesive once opened doesn't keep well, I put clingfilm over the nozzle before fitting the cap back on which helps.
 

Gregory Hardy

Graduate Member
Joined
Jul 7, 2017
Posts
454
Location
Upper New York State
First Name
Greg
Can I assume that using brass round-head nails for additional security would interfere with doing the brass rubbings? If that's not important, epoxy AND the brads might be one step closer to permanency...
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
How about epoxy resin to hold it in place but for extra security silver solder a brass bar to the bottom with ridges around it which will also add to the strength of the bond it would only need to be say 1/2" diameter and 1" long. Drill a hole in the post to accept it. This would leave the top flush for the rubbing
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
A summary would include the above that should ensure success. My hobby of Lapidary tells me the use of two part Epoxies makes an incredible join that withstands and holds.

Peter.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top