• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Galalith lever filler

Pierre---

Full Member
Joined
Feb 3, 2016
Posts
231
Location
France
First Name
Pierre
Hi all,
I go on exploring others ways of filling a fountain pen, today the lever filling system. The pen is made of galalith, one of the first plastics, a mixture of milk and formalin. A wonderful touch.
100_3547 comp.jpg

The section is made of black ebonite, another old plastic, a very warm material, the opposite of icy acrylic.
100_3551 comp.jpg

The lever can be manipulated with the nail, it presses a Jbar that presses a rubber sac, making vacuum. If you dip the nib in an inkwell and put the lever back to its place, then the ink is sucked.
100_3602 comp.jpg

The tricky moment is when trying to insert the lever and its box into the body, but needle files, a Dremel and a good loupe make wonders.
Comments and critics are welcome!
100_3545 comp.jpg
 

Pastor of Muppets

Full Member
Joined
Dec 5, 2017
Posts
279
Location
Oxford (ish)
First Name
Andy
It is always a pleasure to see you work Pierre but I have to ask...... did you say milk??
The pen its self is beautifully proportioned and looks really comfortable to hold.
Great work!
 

Unique

Registered
Joined
May 7, 2017
Posts
251
Location
Kent
First Name
Tony
A tremendous piece of skill and craftsmanship Pierre to make this lovely pen,

Tony
 

Pierre---

Full Member
Joined
Feb 3, 2016
Posts
231
Location
France
First Name
Pierre
I have to ask...... did you say milk??
I did. Casein in fact. But I am afraid I can't tell you more, I am not a chemist...:nooidea:


What tap and die do use for threading?
I use a threading machine, not taps. The difficult part is to build the machine, but when you're done, the advantage is that you can play with any diameter you want, using simple, double, triple or even quad starts if you need it, without buying expensive taps and dies. You can use it I suppose on any material, including wood, which is not that easy to thread with dies. The sizes are M9.3x.8, and M12.2x.75 double start.
 

Paul hd

Fellow
Joined
Jun 12, 2016
Posts
1,299
Location
Buckinghamshire
First Name
Paul
Pierre said:
I use a threading machine, not taps. The difficult part is to build the machine, but when you're done, the advantage is that you can play with any diameter you want, using simple, double, triple or even quad starts if you need it, without buying expensive taps and dies. You can use it I suppose on any material, including wood, which is not that easy to thread with dies. The sizes are M9.3x.8, and M12.2x.75 double start.

Would be great to see what this machine looks like.

I will have to look and see if my Cowells lathe will cut threads.:thinks:
 

Pierre---

Full Member
Joined
Feb 3, 2016
Posts
231
Location
France
First Name
Pierre
It looks like this one. From the right, the mother screw turning in a bolt, the axis, the chuck with the piece to be threaded. On the left side, a milling machine on a XY vice, with a 60° bit.
Filleteuse P Deletraz.jpg
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Dedication shown here Pierre, the resulting pen is worth the effort. Thanks for the detailed little machine for threading picture as well. You do like a challenge.

Peter.
 

Pierre---

Full Member
Joined
Feb 3, 2016
Posts
231
Location
France
First Name
Pierre
I forgot to say that this is not my machine on the photo, but a very similar one - and a good pic too - made by French turner Pierre Delétraz.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top