• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

New heads

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,159
Location
Maidstone
First Name
mark
I have finaly got this sussed....i am drilling out the bullet heads and resizing and seating the bullets into the cases....if i use a 1/4" drill then the transmision is a push fit into the case.....so no kit parts!20180629_180236.jpg
If others would like some of these i may start offering to do them.....i have other calibers too and a lot of "work in progress":thinks:
 

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,159
Location
Maidstone
First Name
mark
Are they .308 cases I have lots of them. What type and weight of bullet are you using. Nice work.

Hi Dave, yes .308s I have used various weights, it's more important that their FMJs as I remove all the lead with drilling. I have a Lee press with dies so deprime and size the case.....drill the base.....then install a drilled bullet again with the press so it's properly seated.:banana:
 

Ray7756

Full Member
Joined
Dec 4, 2017
Posts
198
Location
Kirkmichael Scotland
First Name
Ray
Hi Mark I am just setting up to do bullet pens, as a deer stalker I have no shortage of components, apart from fmj bullets ( not used for stalking) I use a 22-250 for foxing and have looked at making pens from them but they look to short in length , about a 1/4 inch shorter than a 308, have you tried the 22-250 ???? I will stick to the 308 at the moment untill I get used to what is required,, if you want to try the 22-250 im me your address and I will send you a couple of cases and bullets for you to try
Cheers
Ray
 

alpha1

Fellow
Joined
Mar 29, 2018
Posts
1,175
Location
middlesbrough
First Name
Dave
Hi Dave, yes .308s I have used various weights, it's more important that their FMJs as I remove all the lead with drilling. I have a Lee press with dies so deprime and size the case.....drill the base.....then install a drilled bullet again with the press so it's properly seated.:banana:
Looks good you did a nice job.:thumbs: If you need any cases let me know I have a lot of once fired .308 GGG cases.
 

alpha1

Fellow
Joined
Mar 29, 2018
Posts
1,175
Location
middlesbrough
First Name
Dave
.i am drilling out the bullet heads.

I know this is not a shooting forum but the term bullet heads is not correct. Its a bullet. The head is the base of the case. Believe me on a shooting forum you would be shot down in flames for using the term bullet head.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Thanks for the info Dave most of us are aware of proper names and terms using ammunition but choose other expressions including those of us who live in other countries. Tongue in cheek names come freely when we are amongst friends.Welcome to the Pen Forum.

Peter.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top