• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

The Tower Complete

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Finished "The Tower" last night but had to wait until this morning to take the photos.

It stands 12" tall and at it's widest is 3 1/4" The main tower is Ash and the bowl section is Field Maple with the eye in Holly. The top was textured on the outside using a hanging type multi-tool with a small metal cut off disc in the edge.
Ebonising spray was used for the black and airbrush gold paint for the inner surface over the ebonising spray as it is the best effect when done that way. I added some decorative copper nails around the base to add something to a very plain support.
The eye again ebonising spray after using a pyrography machine for the pattern then a gold gilt cream rubbed in. Once it was fully assembled a coat of micro-crystalline wax applied for protection as this is for decoration only so will not be handled a great deal.
 

Attachments

  • DSCF9321 (594x800).jpg
    DSCF9321 (594x800).jpg
    64.1 KB · Views: 71
  • DSCF9330 (600x800).jpg
    DSCF9330 (600x800).jpg
    69.9 KB · Views: 70
  • DSCF9327 (600x800).jpg
    DSCF9327 (600x800).jpg
    67 KB · Views: 70
  • DSCF9328 (800x600).jpg
    DSCF9328 (800x600).jpg
    57.7 KB · Views: 70

Morse

Graduate Member
Joined
Dec 20, 2016
Posts
679
Location
Cheshire. UK
First Name
Dave
That's stunning Derek.
Even the hidden detail under the bowel and the finish.
Did you say it's just to exhibit?
�� Should have put a part of a pen in, then gone for pen of the week.

Dave
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Thank you guys, for what seemed a simple piece took forever to complete. Here is a better photo of the texture
 

Attachments

  • DSCF9325 (600x800).jpg
    DSCF9325 (600x800).jpg
    76.5 KB · Views: 44

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Just an update I must be having a good week with the saws I won in another post and to top it I took this to our woodturning club and entered it in the monthly competition and it won a 1st in the enhanced section so very happy man.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top