• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Two Faced

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
I had a thin piece of Oak which sat in the wood store for ages you know the type "I will do something with that one day".
Anyway, I named this two-faced as the disc can be turned around. The centres one green and one red are from a very small burr that I cut into 1/2" thick pieces for use in turned boxes(which I still have not turned), all the texture is done with a Robert Sorby spiralling and texturing tool. Colouring is spirit stain and then either a light sanding to reveal the high spots, a coloured wax that I made myself or dry brushed over the stain. Then finished with an acrylic sander sealer followed by a satin acrylic lacquer
The base is a plum coloured slate again finished with the acrylic as above the two supporting rods are from some metal that I collect which again may come in handy one day, I think this is stainless steel.
Measurements are as follows Total height is 15 1/2" width 13". and depth 4" the decorative disc is 13" diameter
The second picture with the disc reversed
 

Attachments

  • 20190828_185618 (768x1024).jpg
    20190828_185618 (768x1024).jpg
    56.8 KB · Views: 44
  • 20190828_185526 (724x1024).jpg
    20190828_185526 (724x1024).jpg
    55.6 KB · Views: 43

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,159
Location
Maidstone
First Name
mark
Ah that's what the slate was for...
Yet another very interesting piece, you have been really busy lately......love the colours in that:drool::drool:
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Thank you Mark and Peter just felt like doing something different but then most things I turn are different for me.

Ah that's what the slate was for...
Yet another very interesting piece, you have been really busy lately......love the colours in that:drool::drool:

By the way that is the colour of the slate but with a clear finish only

You could say whoever buys this will get it on the slate:face::face::face:
 

martin.pearson

Full Member
Joined
Nov 2, 2017
Posts
223
Location
Balingry Fife
First Name
Martin
Certainly does look interesting, what size is it? Hard to tell from the pictures.

So just being nosey, what sort of price would you put on something like that? I have absolutely no idea what wood art sells for lol.
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Thank you guys.

Certainly does look interesting, what size is it? Hard to tell from the pictures.

So just being nosey, what sort of price would you put on something like that? I have absolutely no idea what wood art sells for lol.

Size in the description in first post. As for the price, I have not worked that out yet

They are a pair of beauties Derek.:thumbs::thumbs:

Only one Mark the disc is just turned around as it slips onto the two supports giving a choice to what colour
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top