• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Branchwood box

Pierre

Graduate Member
Joined
Sep 2, 2015
Posts
996
Location
Southern Central France
First Name
Pierre
The others have said it, its a really really nice piece.

Looking at the join you have the same problem as I have and for which I dream of a zero kerf tool that avoids the stepping of the lines of the branches or in my case the figure of the wood. Perhaps one of these days in the future, turners will have laser gouges with very very narrow edges!!! This isn't a criticism by the way, just an observation of the impact of tooling. I did once try to avoid the inevitable step in a round box lid to body joint by making a simple 45 degree diagonal between the 2; the jury is still out after 5 years as to whether it worked or not. :goesred:
 

Themackay

Fellow
Joined
Feb 27, 2014
Posts
2,510
Location
Aberdeen
First Name
Alan
The others have said it, its a really really nice piece.

Looking at the join you have the same problem as I have and for which I dream of a zero kerf tool that avoids the stepping of the lines of the branches or in my case the figure of the wood. Perhaps one of these days in the future, turners will have laser gouges with very very narrow edges!!! This isn't a criticism by the way, just an observation of the impact of tooling. I did once try to avoid the inevitable step in a round box lid to body joint by making a simple 45 degree diagonal between the 2; the jury is still out after 5 years as to whether it worked or not. :goesred:

I did think of making an insert for the join then would only be width of the partring tool might try that for a future one
 

Pierre

Graduate Member
Joined
Sep 2, 2015
Posts
996
Location
Southern Central France
First Name
Pierre
I did think of making an insert for the join then would only be width of the partring tool might try that for a future one

I'm not so sure that with the branches so clearly defined as yours that even that would work, because the beauty of the piece is in the contrast of the branches and the acrylic so you will always get a step. In the example I gave, I did a 45 degree part to the centre between box and lid and then hollowed both to leave a 45 degree lip. Luckily I use boxwood so the joins to the grain didn't show as much. The box sold for the asking price but I was never as happy with that join as I am with a stepped join (mind you that could be tradition getting in the way of innovation) .
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
If you use a Japanese saw as they have a very thin kerf you just need to make sure you cut them straight.

Great looking box
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top