• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Pen Blank Moulds

Bucks

Fellow
Joined
Apr 26, 2016
Posts
1,425
Location
North Yorkshire
First Name
Paul
We have just updated our website with our revised sized Pen Blank/Block Moulds. We've made the moulds 5mm higher to avoid spillage and included a handy indicator line on the inside of each mould to enable you to fill to the right level, and also the name and size of blanks are embossed on the outside.

Due to the new moulds being slightly smaller (from 150mm to 135mm long) we've been able to reduce the price of the moulds.
Block Mould - 20-25mm x 150mm x 135mm
Double Pen Blank Mould - 3 blanks @ 20mm x 43mm x 135mm
Single Pen Blank Mould - 5 blanks @ 20mm x 20mm x 135mm

Note: If purchasing Condensation Cure moulds please check that they will be suitable for any resins you plan to use in them as they are not recommended for use in most clear resins, please click here for details on Condensation vs Addition Cure silicones. We would recommend using Addition Cure moulds as they have numerous advantages over the Condensation Cure moulds such as, being suitable for all types of resins, more rigid making it easier to transfer your mould to a pressure pot and having up to a 20 year shelf life compared to a 5 year shelf life with Condensation Cure moulds. The only advantage for pen turners of purchasing Condensation Cure moulds is the cheaper cost.

We are planning on making other sized moulds including bottle stoppers, shaving kits etc. If there's anything specific you are wanting please contact us as we are always looking to extend our range.
Block Moulds.jpg
 

fortress

Registered
Joined
Apr 11, 2016
Posts
5,178
Location
Astley
First Name
John
I have used your Moulds Paul and I am impressed, they are well made and very practical, I rest My case. :thumbs::thumbs:
 
Top