• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Long Single Pen Blank Mould

Bucks

Fellow
Joined
Apr 26, 2016
Posts
1,425
Location
North Yorkshire
First Name
Paul
5BA45446-4B83-4729-BF79-E327026D84BF.jpg

This longer version of our Single Pen Blank Mould has been made to accommodate the growing range of pen kits which use longer tubes, you can get 2 projects out of one blank with kits such as razor handles and the new TM Athena, or you can now easily get 3 standard tubes such as Sierras from one blank without the usual waste.

2 cavities @ 20mm x 20mm x 180mm.

Each cavity requires approx 80ml of resin to fill line.

External Dimensions of mould - 84mm x 210mm x 35mm.

Note: internal height of the cavities are 25mm to prevent spillages and has a handy indicator line to enable you to fill to the right level.

www.penblanksandmoulds.co.uk/long-single-pen-blank-mould
 
Top