• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Universal Casting Mould

Bucks

Fellow
Joined
Apr 26, 2016
Posts
1,425
Location
North Yorkshire
First Name
Paul
4C714317-1558-439F-9179-CC510F107AEC.jpg

This casting mould is truly universal and has endless possibilities as to what you can cast from it, for example, with a full cast you can cross cut blanks to required length for shaving brush handles, bottle stoppers, spinning tops etc. You can cut the blank lengthways to get four 20mm x 20mm x 180mm pen blanks or slice the blank lengthways to create matching knife scales. You can also just partially fill the mould with resin (we’ve added a handy fill line at the halfway point) for 2 pen blanks or 1 set of knife scales etc, the list is endless. If you don’t want to cast the full length of the mould you can use a piece of HDPE or other suitable material to create a shorter cavity.

1 cavity @ 45mm x 45mm x 180mm.

The cavity requires approx 360ml of resin to fill line.

External Dimensions of mould - 74mm x 210mm x 60mm.

Note: internal height of the cavities are 50mm to prevent spillages and has a handy indicator line to enable you to fill to the right level.

www.penblanksandmoulds.co.uk/universal-casting-mould
 
Top