• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Bucks

Fellow
Joined
Apr 26, 2016
Posts
1,425
Location
North Yorkshire
First Name
Paul
D03EF478-00E5-4696-8750-29EBDCDECB12.jpg

These plugs, when used in conjunction with any of our 20mm Single Pen Blank Moulds, make it possible to Label/Tube-In cast in virtually any pen kit on the market without needing to purchase our dedicated “Less-Resin” Moulds. The plugs come in 2 different sizes, small plugs cover 7mm-10.7mm tubes and large plugs cover 9.5mm-14mm tubes.

This is a great system if using lots of different tube sizes however if you do multiple casts using the same tube size our dedicated “Less-Resin” Moulds would be more suitable and use considerably less resin (as the name implies) saving you money in the long run.
For example -
2 x Slimline tubes use 60ml of resin with the Tube-In plugs but only 45ml of resin in a “Less-Resin” Mould.
2 x Sierra tubes use 50ml resin (small plugs) or 60ml resin (Large plugs) using the Tube-In plugs but only 40ml resin in a “Less-Resin” Mould.

Plugs are sold in pairs so you can customise the number and the size of plugs that you require. Depending on tube and plug sizes you can fit 2 tubes per cavity in our Long and Extra Long Single Pen Blank Moulds.

www.penblanksandmoulds.co.uk/tube-in-casting-plugs
 

Bucks

Fellow
Joined
Apr 26, 2016
Posts
1,425
Location
North Yorkshire
First Name
Paul
Looks just like Solimould and Maneater

But these are designed to be used in our existing range of Silicone Single Pen Blank Moulds, so for everyone who has already purchased our moulds they don’t necessarily have to be buying another mould.
By the way our moulds are Silicone & not HDPE like the others.
 
Top