• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

wide

  1. apw43

    sweet chestnut burr

    Hi Folks Not posted for a while, this is the latest piece off the lathe, size is approx 24 inches wide x 17 inches as usual c&c welcome Andy
  2. Les ELm

    Petrified...........

    Bone of some sort on a SS One Piece Core. Size 6 X 5mm Wide. Les
  3. Les ELm

    Still learning.............

    Stabilized Red Dyed Maple Burl with a SS One Piece Core. Size 7.5 X 8mm Wide. Finished with 8 coats of Med CA. Polished with AUTOSOL metal polish. Les
  4. Les ELm

    For the ladiy hunter ......

    SS One Piece Core dressed with Elk antler showing both Marrow and Bark. Size 6.5 X 5mm Wide. Les
  5. Les ELm

    Mini Pine......

    Cone and acrylic SS One piece Core. Size 11 X 8mm wide. Finished and polished with AUTOSOL. Les
  6. Les ELm

    Elk ............

    Antler marrow stabilized with Thin CA. SS One Piece Core. Size 9.5 X 5mm wide. Les
  7. F

    Paduk Athena

    Hi all, This is the first time I had turned Paduk. It took me two goes having taken the first effort down to brass. The lesson I learnt was that it is a must to wipe down the wood before and between each sandings. Dust was caught in the wide grain and effectively ruined a blank. Anyway, this is...
  8. Dalboy

    First turning stsrted

    Well except for the little pot with the slots in it the others I have started turning but am working on all three at the moment The one with slots I have now done some pyrography on it just to get a textured surface tomorrow hope to start adding colour. The next piece the one with the slots has...
    • Dalboy
    • Thread
    • slots tomorrow turned turning wide
    • Replies: 15
    • Forum: Off Topic
  9. Dalboy

    Markers

    My cousin came to the open day and saw something to mark her veg with but not any for what she grows so asked if I could make some with rustic style writing. Anyway this is what I came up with and a little extra with the pictures made from Oak and about 1/4" thick 1" wide and 7" long. And I...
  10. hawkeyefxr

    Need a bit of help/guidance maybe on Bandsaws

    I have a Scheppach bandsaw Basato 1, i have only ever used 1/4 wide blades and they are a royal pain to get to run on the wheels. I have now bought a 3/8 wide blade and i cannot get the blade to stay on the wheels no matter what i do. When i set the saw blade up i set all the guides wide open, i...
Top