• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Mr Finch

Full Member
Joined
Sep 23, 2013
Posts
172
Location
Fareham, Hampshire
First Name
Coll
Folks

I have just received a Joyner "off-center" jig with 2MT. I need to make a draw bar using 1/4x20 threaded rod. Does anybody know the metric equivalent that I need to purchase please?

I *think* it's M6x1 but want to be sure.

Thanks!
 

Buckeye

ペンメーカー
Executive Member
Joined
Oct 15, 2013
Posts
9,697
Location
UK
First Name
Peter
M10 doesn't come close to 1/4 x 20

I think it is M6x1.25 if we call 1 inch 25mm and divide that by 1.25 we get 20 tpi but check it out with m6 bolts with different pitches.

Peter
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,455
Location
Colebrooke, Devon
First Name
Phil
1/4 x 20 is quarter inch British Standard Whitworth. That's why you can't find it by its pitch. Look for 1/4 BSW Colin.
 

Buckeye

ペンメーカー
Executive Member
Joined
Oct 15, 2013
Posts
9,697
Location
UK
First Name
Peter
1/4 x 20 is quarter inch British Standard Whitworth. That's why you can't find it by its pitch. Look for 1/4 BSW Colin.

Much better to buy the bar with the correct thread if possible or buy a die nut and make your own.

Peter
 

EStreet

Registered
Joined
Jan 12, 2015
Posts
289
Location
USA
First Name
Ed
Sorry but your wrong. NC SAE. The profile is different on SAE vs BSW by a good 5deg.
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,455
Location
Colebrooke, Devon
First Name
Phil
This is for a drawbar on a lathe. It's not parts for a bloody NASA project. 1/4 BSW is commonly available and is 1/4 x 20. It will do the job.
 

Buckeye

ペンメーカー
Executive Member
Joined
Oct 15, 2013
Posts
9,697
Location
UK
First Name
Peter
Don't be silly, 1/4 x 20 is BSW if you would like to buy taps or dies you can buy them here unless you think they are lying.

Of course the 1/4 x 20 used in the jig above maybe SAE it would make sense coming from the US nothing seems to be standard just like their ounce, but it wasn't clear that it came from the US

Peter
 

EStreet

Registered
Joined
Jan 12, 2015
Posts
289
Location
USA
First Name
Ed
6f5730754794ab8324ed23d4b707839a.png


This may help.
 

Buckeye

ペンメーカー
Executive Member
Joined
Oct 15, 2013
Posts
9,697
Location
UK
First Name
Peter
It doesn't help with anything that I can see.

Peter
 

Bigblackdog

Registered
Joined
Dec 28, 2014
Posts
839
Location
Leeds
First Name
Mark
i bought a length of 1/4 20 unc from cromwell. I cant find it on their website but it was in stock and a couple of pounds
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top