• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Axminster precision lathe

B

Burt25

Full Member
Joined
Apr 29, 2016
Posts
147
Location
N Ireland
First Name
Ian
I have been given an axminster precision pen turning lathe which comes with a 24x1 collet and axminster evolution mandrel. I have my full size lathe as well am am finding this second small lathe is great for doing my pens. The collet system is great but I would live to be able to drill my blanks on this lathe and was wondering if anyone knows of a scroll chuck which could be fitted on this lathe. I have looked online but I don't see anything with this tread size. Could I possibly get a thread adapter to allow a scroll chuck to be used? Any thoughts?
 
Neil Lawton

Neil Lawton

Longlocks
Fellow
Joined
Dec 26, 2013
Posts
3,115
Location
York
First Name
Neil
I have one of these, and I think I'm right in saying there is no scroll chuck available to fit, at this time.

Walter wrote the review for woodturning magazine, so I'm sure he would know.
 
B

Bigblackdog

Registered
Joined
Dec 28, 2014
Posts
839
Location
Leeds
First Name
Mark
what is the largest collet that you can put on the lathe? I like to round my blank before drilling, so you can see the grain of the wood. I don't always do so, but if I have a nice blank I will.
 
Penpal

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
It would be good if you could get a dedicated two jaw special chuck such as the Vicmarc I have it is superb.

Peter.
 

Attachments

  • DSCF0016 (1).JPG
    DSCF0016 (1).JPG
    125.6 KB · Views: 75
Walter

Walter

Moderator
Fellow
Joined
Apr 22, 2013
Posts
2,698
Location
Amble on the sunny Northumberland coast.
First Name
Walter
Burt25 said:
I was wondering if anyone knows of a scroll chuck which could be fitted on this lathe. I have looked online but I don't see anything with this tread size. Could I possibly get a thread adapter to allow a scroll chuck to be used? Any thoughts?
Click to expand...

No, neither a chuck nor adapter are available in M24 x 1 which is a pity because it would be useful.

Neil Lawton said:
I have one of these, and I think I'm right in saying there is no scroll chuck available to fit, at this time.

Walter wrote the review for woodturning magazine, so I'm sure he would know.
Click to expand...

You are, I did, there isn't. Here is a link to the review: Dropbox - WT_291_94_97_KIT_&_TOOLS_vsMB.pdf



Bigblackdog said:
what is the largest collet that you can put on the lathe?
Click to expand...

13mm
 
21William

21William

Fellow
Joined
Jan 21, 2016
Posts
1,619
Location
Dorset
First Name
William
Axminster make a lot of their own stuff on site. I would have though it would be quite easy for them to make an adaptor to fit a small chuck. Probably not enough interest in one though. Any engineering company should be able to make one though at a price.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top