• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Flexispeed Mk1, worth a go?

Nathan

Apprentice Member
Joined
Nov 13, 2017
Posts
3
Location
Guildford
First Name
Nathan
Hi Guys, I'm new to both the forum and the world of pen turning and am looking to give pen turning a go. I have the opportunity of picking up a Flexispeed Mk1 lathe with motor and hardwood base for circa £50, all apparently in good (quiet!) working order. These lathes appear to be a very old and limited design but the price is obviously very appealing on a limited hobby budget. Has anyone on the forum got any idea if these lathes would be suitable for a bit of pen turning? getting MT0 attachments appears to be a bit of a challenge also.

Thanks
Nathan
 

Walter

Moderator
Fellow
Joined
Apr 22, 2013
Posts
2,697
Location
Amble on the sunny Northumberland coast.
First Name
Walter
Welcome to the forum Nathan.

Whilst it is possible to turn pens on a metalworking lathe it would not be my first choice of place to start for a beginner.

Plus as you say finding 0MT mandrels and other accessories will be difficult.

Your decision but personally I would look for an old woodturning lathe with 1MT or 2MT head and tailstock taper.
 

Lons

Fellow
Joined
Dec 17, 2013
Posts
4,753
Location
Northumberland
First Name
Bob
What Walter said Nathan but if you can afford it I would buy the lathe anyway as a little metal lathe can be very useful in it's own right. i don't know anything about the model you mention but I certainly wouldn't part with my little watchmakers lathe.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Looking at the Flexispeed and without a full description in detail of your proposed lathe, you will need to weigh up the worth and real usefulness. Best buying for pens is a 2 morse taper head stock and tail stock, ball race bearings, variable speed lathe.. I remember not long back Paul bought a smashing small metal lathe and loves it to bits.

Good luck and Nathan pay a visit to a local Wood group, listen to the chatter, good luck mate.

Peter.
 

Nathan

Apprentice Member
Joined
Nov 13, 2017
Posts
3
Location
Guildford
First Name
Nathan
Thanks for your input guys :thumbs:, having had a look round various sites and doing a bit of research, I don't think the lathe will be suitable. I'm leaning towards the Axminster AH1218vs which appears to be a decent choice for a lathe to do some bigger turning on too.
 

Graham_C

Fellow
Joined
Feb 1, 2017
Posts
1,153
Location
Tywyn
First Name
Graham
Looks like a good choice to me Nathan :thumbs: Someone with knowledge of this or similar Axminster lathes will be able to confirm the suitability and quality.
 

wm460

Grand Master
Joined
Mar 16, 2013
Posts
23,095
Location
Tennant Creek, Northern Territory, Australia.
First Name
Mark

Walter

Moderator
Fellow
Joined
Apr 22, 2013
Posts
2,697
Location
Amble on the sunny Northumberland coast.
First Name
Walter
Thanks for your input guys :thumbs:, having had a look round various sites and doing a bit of research, I don't think the lathe will be suitable. I'm leaning towards the Axminster AH1218vs which appears to be a decent choice for a lathe to do some bigger turning on too.

Not a bad lathe but for not a great deal more you could get the much better Record DML320.

DML320 Cast Iron Variable Speed Lathe
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top