• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Gouges what to buy.

alpha1

Fellow
Joined
Mar 29, 2018
Posts
1,175
Location
middlesbrough
First Name
Dave
I want to purchase some gouges. I have adapted my metal lathe for pen turning I can machine straight wall pen blanks using my existing carbide cutters. Some of the pen kits actually quite a lot are not straight wall but curved blanks. Im looking to buy a 1/8" parting tool,
a 1/2" Skew and a 1/4" bowl/spindle gouge. I don't want cheap then again I don't want to have to remortgage the house to acquire them. Recommendations please where is a good place get them from.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
The tools that take blades called renovating tools have various straight cutters in various widths and make idea narrow parting tools.

Peter.
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,452
Location
Colebrooke, Devon
First Name
Phil
I'm sure that every turner will have their favourite makes. You are right not to go cheap, and speaking for myself I tend to buy Robert Sorby (from Turners Retreat) and Ashley Isles (direct from Ashley Isles) as they are both extremely good quality without breaking the bank. If they are over budget, Hamlet is another make that is slightly cheaper, but to be honest not quite as good.

I would advise though, that your first pen gouge needs to be a spindle not a bowl, and should be a half inch not a quarter inch. Quarter inch is great for tiny beads and coves, but a half inch is not only more robust, it's also much more versatile for every day turning, including the normal sort of profiling that is seen on a pen.
 

21William

Fellow
Joined
Jan 21, 2016
Posts
1,617
Location
Dorset
First Name
William
I would go for the Crown Rolled Edge Skew and the Crown Firmager 1/16” parting tool.

Crown Parting & Skew

I personally think you may be better off with a 3/8” spindle gouge (any good make) with a Cindy Drozda grind.

Cindy Drozda - How to use the Drozda Spindle Gouge for Woodturning - YouTube

You can change the grind anytime if you don’t like.

Can’t remember the make but one of the big manufacturers makes a “universal” gouge for both bowl and spindle turning.
This might be a good choice but I’ve not tried one myself.
 

21William

Fellow
Joined
Jan 21, 2016
Posts
1,617
Location
Dorset
First Name
William
I remember who made the gouge, it’s mentioned here, it’s called the “All Rounder”:

The Brailsford Set

I can’t find anyone that sells it though so contact the maker direct if you want one.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Dave an excellent choice when turning pens using this length and versatility . The brand is money in the bank. Enjoy,,,,,,,on with the turning.

Peter.
 

alpha1

Fellow
Joined
Mar 29, 2018
Posts
1,175
Location
middlesbrough
First Name
Dave
Well they arrived to day along with some bushings. I have set aside Sunday as a shed day I have a couple of kits and a load of blanks. Only problem is I have no idea how you are supposed to use these gouges and what each one is for.:thinks:
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top