• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Vacuum Chamber ready to go

Burt25

Full Member
Joined
Apr 29, 2016
Posts
147
Location
N Ireland
First Name
Ian
Just finishes making my DIY vacuum chamber - now to get some Cactus Juice and start stabilising.
All done for under £200. Used Robinair Vacuum pump, Vintage glass sweetie jar, fittings and hose from ebay, Sheet of rubber for gasket (All from Ebay)Sample piece of Corian (Free!).

Tested tonight and seems to be working great - just need to order up some Cactus juice and get stabilising - have a load of punky spalted beech which until now I havent been able to do anything with.
 

Attachments

  • 20180622_211423.jpg
    20180622_211423.jpg
    97 KB · Views: 77
  • 20180622_211333_001.jpg
    20180622_211333_001.jpg
    56.5 KB · Views: 77

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,455
Location
Colebrooke, Devon
First Name
Phil
Serious question, based on ignorance on my part Ian - is that black rubber seal all that is required to maintain sufficient vacuum in the jar. No mechanical means of attaching the lid to the jar apart from the seal?
 

Bammer

Fellow
Joined
Oct 5, 2015
Posts
1,482
Location
Cambridge
First Name
Brad
Serious question, based on ignorance on my part Ian - is that black rubber seal all that is required to maintain sufficient vacuum in the jar. No mechanical means of attaching the lid to the jar apart from the seal?


That's all Phil, even the big pots just have a seal, no mechanical means.;
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
All vacuum systems used on a lathe use the same principal,n the situation on the lathe the trick is to turn off the vacuum after you stop the lathe. A simple vacuum cleaner was all I used on my vac system made by Vic Marc. I gave this with the lathe I used it on not long back to a mens shed. Loved it.

Peter.
 

nimrod

Graduate Member
Joined
May 10, 2013
Posts
418
Location
Lancaster
First Name
Robin
I use the same principal but use an old pressure cooker for the pot. Ian there is a company in Coventry called Ultraseal they make a wood stabiliser its a while since I bought it, it was £150 for 5kg plus delivery. I was very pleased with the results and also got some forum members to turn some stabilised blanks who agreed. If you are interested their email is www.ultraseal.co .uk

Robin
 

Normancb

Full Member
Joined
Oct 16, 2013
Posts
10
Location
Brighton, UK
Can I plead with you at the very least to wrap that sweetie jar in a layer of sellotape or insulating tape or enclose it in a tightly fitting plastic net.

I spent a long career working in laboratories with vacuum equipment and glass vessels. That’s a pretty nice pump you have there and will pull a decent vacuum, which means you will have 15 psi pressure difference across the walls of your vessel. Heavy square-cornered jars with flat bottoms are not designed to withstand that sort of load and any kind of stress-concentrating micro-crack or small impact can cause the whole thing to implode. I’ve seen what happens when a lab desiccator implodes and it’s not at all pretty – high velocity glass fragments are not nice. I would never evacuate something like that without some way of containing an explosion.

Sorry to come over as preaching H&S but if that’s genuinely a vintage sweetie jar then you’ve built a significantly dangerous device.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top