• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Your views on Axminster Button Jaws

KevinMc

Graduate Member
Joined
Jul 2, 2017
Posts
594
Location
North East England - Tyne & Wear
First Name
Kevin
Hi

Has anyone got any views on these button jaws apparently 300mm Axminster ones although I guess now no longer sold by them.

I see them for sale locally at £60... are they a good bet or not?

Kevin:banana:
 

Attachments

  • 85823A35-2080-4D51-BF95-D50CBFC16830.jpg
    85823A35-2080-4D51-BF95-D50CBFC16830.jpg
    55.2 KB · Views: 84

21William

Fellow
Joined
Jan 21, 2016
Posts
1,618
Location
Dorset
First Name
William
That’s called a Longworth chuck, several places sell them:

Longworth Style Chuck 10" Ref Lsc10 RS/LSC10 from Westcountry Machinery 4 Wood

Button jaws are plates that fit onto a scroll chuck:

Axminster Button Jaws 150mm - Jaws for Axminster 100mm Chucks - Chuck Jaws - Woodturning Chucks - Lathe Accessories - Machinery Accessories - Accessories | Axminster Tools & Machinery

Button jaws have a higher clamping force than a Longworth chuck. Having used both I don’t like either, I’m going to try a Donut chuck next, as soon as I get round to making one.

This is a commercial one:

doughnut chuck
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Whether it is the longworth chuck or cole jaws they are OK but I would tend to use the tailstock to hole the piece while any work is being carried out, you may get away with light cuts but great care should be taken all of the time. For a better hold then a doughnut chuck would be the better option but you will need to make them. The advantage of doughnut chuchs is that you can clean the bottom of nateral edged bowls with the addition of a jam chuck under the bowl.
All I use to clean the bottom of bowls is a jam chuck with the tailstock brought up with a ring centre. clean off as much as possible then take the little stub off by hand and sand
 

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,301
Location
Somewhere in Staffordshire,
First Name
Eamonn.
[MENTION=1682]KevinMc[/MENTION]
I had a set of 150mm jaws that Gold brought me for a presssie.. wasn't really big enough for what I wanted so brought the larger 250mm set.. sold the others on e bay.

I was using a home made one that Dad had made before, wasn't really confident with them and decided to get the proper thing..

I would say they are superb and great addition as I have been making some clocks and wanted to finish the backs smooth.

Not as simple to set up but very easy to use..

The ones I have are different to the Ines you show in the pic tho..:thinks:
See link below..

Axminster Button Jaws 250mm - Jaws for Axminster 100mm Chucks - Chuck Jaws - Woodturning Chucks - Lathe Accessories - Machinery Accessories - Accessories | Axminster Tools & Machinery
 

Bill Mooney

Blind old git
Grand Master
Joined
Aug 16, 2014
Posts
10,997
Location
County Durham
First Name
Bill
I use my vacuum chuck or vacuum plate with tail stock up until the very end when I remove the little spigot, sand & finish.
 

monophoto

Full Member
Joined
Dec 17, 2013
Posts
67
Location
New York
First Name
Louie
With great care and slow speeds an excellent method of reverse holding to alter or finish the base of bowls.

Peter.

These are tools. As Peter said, and as it true for all tools, if used properly and with full awareness of the safety limitations, they can be very useful.

The general rule of thumb with both button jaws (aka Cole jaws) and Longworth chucks is that the maximum speed is around 600 r/min.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top