• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

MikeRudkin

Apprentice Member
Joined
Aug 29, 2016
Posts
3
Location
Weston Super Mare
First Name
Michael
I've only just started turning in last month-looking at youtube vids it talks about using a piece of scrap timber to make a jamb chuck. Where does this 'scrap wood' come from ? :-) There seems to be an assumption that there's timber scattered all over the place.
Can you get offcuts from local DIY merchants or what ?
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Weston Super Mare must surely be known to some members who may chime in. Stray timber is never a problem when you look around. An easy answer is look for a turning club in your area. Go to your local council they clear street trees and storm damage. Good hunting.

Peter.
 

Buckeye

ペンメーカー
Executive Member
Joined
Oct 15, 2013
Posts
9,697
Location
UK
First Name
Peter
There is timber scattered all over the place, you just have to find it. Have a look on Freecycle you will find people who cut trees down in their garden and offer it for firewood, I have had a couple of lovely oak burrs that way. Freecycle also has lots of furniture on offer, if it's solid wood that can be used. Go to your local municipal dump and look at all the wood and garden waste that is available, tons of it.

Peter
 

bassethound

Executive Member
Joined
Mar 12, 2014
Posts
7,581
Location
East Sussex
First Name
Ted
Woody showed a Pin chuck being made, a Jam chuck is made with 2 bits of timber or one piece and a recess made in the work piece I think you will find!
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,681
Location
Kent
First Name
Derek
Building sites are a great place as long as you ask permission. They have offcuts of beams and joists which can be stuck together to make thicker pieces then turned. And as already mentioned freecycle a trip to your local joiners shop can also be fruitful remember jam chuck don't need to be hardwoods as many are use once and throw away or return to a different size. Also fencing companies for offcuts of fence posts.
Wood is all around you if you know where to look after all it grows on trees:whistling:
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
The most common timber used over here for jam chucks is Radiata Pine it grows like a weed in forest environment has a quick yield and is used for house frames etc. Common as always offcuts wherever.

Peter.
 

Winemaker

Registered
Joined
Oct 7, 2014
Posts
2,059
Location
Cornwall
First Name
Tom
I use any waste wood or may I say any cock ups :sob: just save them all in a box and use them up. If you still need some have a walk in the woods loads of it there :whistling:
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top