-
Thanks for visiting The Penturners Forum today.
There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.
To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.
Penpal
Grand Master
Yes but only for the base tidy up. Bought second hand made bby Vic Marc. I use an old vacuum cleaner for the suction. The trick is to leave the vacuum on after the lathe is stopped. Price determined by methods of holding and vacuum used.
Peter.
Peter.
wm460
Grand Master
- Joined
- Mar 16, 2013
- Posts
- 23,100
- First Name
- Mark
I bought a Rotating Union M16x1.5 Part No. V01215
Vicmarc - Woodturning Lathes, Chucks, Jaws and Accessories -
That is connected to a vacuum pump, I am in the process of making the Vacuum Plate.
Vicmarc - Woodturning Lathes, Chucks, Jaws and Accessories -
That is connected to a vacuum pump, I am in the process of making the Vacuum Plate.
I've used a vacuum chuck for quite a few years now & wouldn't be without mine, so easy to use. As to cost you can google & compare types & cost. I ve had mine too long to give an up to date costing. I made my own at first & it worked well. Google this as will & look at YouTube for how to make if this is the route you want to go. The two types of vacuum generators are Venturi which works off a compressor to give vacuum. The other type is a vacuum pump, of which there are several versions, oil filled or oilers.
Hope this is of help.
Hope this is of help.