• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Worst pen todate

Morse

Graduate Member
Joined
Dec 20, 2016
Posts
679
Location
Cheshire. UK
First Name
Dave
Well this started with my post asking about what wood shouldn't we use for pens.
One moderator, Phil, said Balsa wood.
So up for a challenge I bought a piece of 12mm X 12mm and cut it to fit a slim line kit that I had.
Drilling no problem. First CA glued tube, in, second CA glued tube stuck half way, quick bang , in.
Trimmed off ends using a light touch on the belt sander. Ready for turning.
Tried sharp tools, decided to sand instead.
Sand sealed , Yorkshire gritted, tried a stain to darken wood, wouldn't dry in my refrigerated shed.
Sanded off and finished with micro crystaline wax.
Assembly. Not good seemed to squash the wood.
End result, as Walter says, "photos can hide a multitude of sins" (or near enough).
 

Attachments

  • image.jpg
    image.jpg
    34.3 KB · Views: 127
  • image.jpg
    image.jpg
    23.4 KB · Views: 130
  • image.jpg
    image.jpg
    25.2 KB · Views: 127

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,159
Location
Maidstone
First Name
mark
Its 'different' thats for sure.....but you might have just set a challange.....i got to give that a try lol:duh:
 

Morse

Graduate Member
Joined
Dec 20, 2016
Posts
679
Location
Cheshire. UK
First Name
Dave
Hi flexi
A challange. That's what I thought when Phil said "not balsa wood" it is a hardwood.:winking:

Dave
 

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,159
Location
Maidstone
First Name
mark
I do like to try different things and have used some strange materials.....leather...denim....corn...pencils...even poo.
Its worth a try....i also want to do a MDF one sometime:thinks:
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
I have a cork blank ready for turning made up from cork tiles it could be a floater:whistling:
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
You succeeded to prove that Balsa wood is a problem also using the cheapest Slimline kit available, thanks for sharing.

Peter.
 

KevinMc

Graduate Member
Joined
Jul 2, 2017
Posts
594
Location
North East England - Tyne & Wear
First Name
Kevin
Love it when people just “try” stuff and are not afraid to share the results...

Sometimes it can all be just too perfect what’s shown....

Thanks for sharing

I am busy turning my 2nd ever platter for the Woodturning club show and be critiqued night tomorrow... might put that up later

Kevin :banana:
 

Morse

Graduate Member
Joined
Dec 20, 2016
Posts
679
Location
Cheshire. UK
First Name
Dave
I'm sure if I was a bit more careful it "wood" have turned out OK.
Certainly a " light" pen.
One for my pocket.

Dave
 

yorkshireman

Wood Rat
Executive Member
Joined
Jan 5, 2013
Posts
5,199
Location
wrexham
First Name
Keith
Well done for trying dave mate. Bring it with you tomorrow I’d like to look at it up close.
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Cork....now there's another interesting one!!

Pulled these out of the draw just now this is as far as I got with them. It would be interesting to see if a pen would float, water may not be any good for the mechanism.
The two cork blanks I have one still in the original glue up and the other turned big enough to be able to drill and make into a pen. You can see the glue lines in the one I have turned to round.
You do need very sharp tools to turn this otherwise it can pull the bits of cork out
They maybe better if they are stabalised:thinks:
 

Attachments

  • DSCF9031 (800x565).jpg
    DSCF9031 (800x565).jpg
    104.5 KB · Views: 45
  • DSCF9034 (800x600).jpg
    DSCF9034 (800x600).jpg
    101.3 KB · Views: 45
  • DSCF9035 (800x600).jpg
    DSCF9035 (800x600).jpg
    119.4 KB · Views: 45

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,159
Location
Maidstone
First Name
mark
Clever.....i did a stacked leather washer pen stacked the other way.....more glueing up so a bit more stable.
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Clever.....i did a stacked leather washer pen stacked the other way.....more glueing up so a bit more stable.

I did it as an experiment I must try to turn them to see how they look on a pen, as well as turn some other pens as I am now in need of topping my box up
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,455
Location
Colebrooke, Devon
First Name
Phil
Ha ha. Love it. I was being flippant when I said balsa wood, but you may have kicked off The Great Balsawood Pen Challenge.
I guess stabilising the wood in a vacuum chamber would have made a difference, but that would make it one heck of an expensive blank as a result. Would drenching in CA have solved the problem I wonder? I suspect that one or two people are going to find out what the options are pretty soon. If I can find some balsawood, I'm up for the challenge. (It's not native to the Highlands I'm afraid, :whistling: and my nearest modelling shop is a 220 mile round trip - if anyone is buying in and wants to send me a piece, I'm happy to re-imburse)
 

KevinMc

Graduate Member
Joined
Jul 2, 2017
Posts
594
Location
North East England - Tyne & Wear
First Name
Kevin
Ha ha. Love it. I was being flippant when I said balsa wood, but you may have kicked off The Great Balsawood Pen Challenge.
I guess stabilising the wood in a vacuum chamber would have made a difference, but that would make it one heck of an expensive blank as a result. Would drenching in CA have solved the problem I wonder? I suspect that one or two people are going to find out what the options are pretty soon. If I can find some balsawood, I'm up for the challenge. (It's not native to the Highlands I'm afraid, :whistling: and my nearest modelling shop is a 220 mile round trip - if anyone is buying in and wants to send me a piece, I'm happy to re-imburse)

Let me know if there are no takers.... and if you explain what you want I can see if I can bring some up.

Kevin :banana:
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
And to think [MENTION=735]Phil Dart[/MENTION] that I gave all of my balsa wood away I had stacks of it
 

Morse

Graduate Member
Joined
Dec 20, 2016
Posts
679
Location
Cheshire. UK
First Name
Dave
Ha ha. Love it. I was being flippant when I said balsa wood, but you may have kicked off The Great Balsawood Pen Challenge.
I guess stabilising the wood in a vacuum chamber would have made a difference, but that would make it one heck of an expensive blank as a result. Would drenching in CA have solved the problem I wonder? I suspect that one or two people are going to find out what the options are pretty soon. If I can find some balsawood, I'm up for the challenge. (It's not native to the Highlands I'm afraid, :whistling: and my nearest modelling shop is a 220 mile round trip - if anyone is buying in and wants to send me a piece, I'm happy to re-imburse)

Hi Phil.
I just saw it as a challange.
There are apparently three grades of balsa wood. Don't know what I got from the craft shop, but could only use 80 grit and above, so the only turning was the lathe.
Maybe soaking it in sand sealer before turning would help.

Dave
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Why not make the challenge to see what unusual materials a pen can be turned from without using a stabalising system or casting something in resin but allow the use of CA or sander sealer applied on the lathe. The pen must still be fit for use this will also exclude freezing something like food of any kind.

OK I,ll get my coat
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top