• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

cross cut pens update

martin.pearson

Full Member
Joined
Nov 2, 2017
Posts
223
Location
Balingry Fife
First Name
Martin
So I have continued with the cross cut blanks & can report that so far I have not had a single chipped blank so hopefully the problem has been solved, difficult to say what was causing the problem as I have made a number of changes & any one of them or a combination of them could have been the culprit. Anyway hopefully the chipped ends are all in the past.
Couple of pictures just to show all is OK now, the first picture plus some others which I havent photographed have all been turned since making the changes, the second picture is the comfort pens I ended up making with blanks that I had chipped the ends on & couldn't repair, couldn't bring myself to just throw these away lol

Obviously these still need to be assembled, have quite a few now that need put together lol, my turning is not great but hopefully will improve with practice, good thing though is that the wood for most of these is so nice you just don't notice lol
 

Attachments

  • cross cut1.JPG
    cross cut1.JPG
    146.2 KB · Views: 85
  • cross cut comfort1.JPG
    cross cut comfort1.JPG
    154.1 KB · Views: 85

martin.pearson

Full Member
Joined
Nov 2, 2017
Posts
223
Location
Balingry Fife
First Name
Martin
Thanks people, most of them have been made from offcut bits of wood from other things that I do, I bought a couple of packs of pen blanks when I first started but then thought it was a bit of a waste of money when I had so many really nice bits of offcut that were to small to be used for much else lol
 

martin.pearson

Full Member
Joined
Nov 2, 2017
Posts
223
Location
Balingry Fife
First Name
Martin
If at first you don't succeed....
Delighted you've got the better of it Martin.

So far so good thanks Phil, not saying it won't happen again (don't want to tempt fate lol) but the chances of it happening again must now be greatly reduced with the changes I have made thanks to advice from the forum.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Every pen blank I cut from that is possible is right angle cross cut. The difference on pens isw like night and day,worth the extra effort IMHO. Glad its working better for you.

Peter.
 

martin.pearson

Full Member
Joined
Nov 2, 2017
Posts
223
Location
Balingry Fife
First Name
Martin
Every pen blank I cut from that is possible is right angle cross cut. The difference on pens isw like night and day,worth the extra effort IMHO. Glad its working better for you.

Peter.

Peter, when I first started I bought a few different blanks from various places, they were all cut with the grain. When I started to cut my own blanks I cut them all the same way as I just thought that was how it was done. I buy Olive wood blanks & while looking at the sellers website noticed he had cross cut blanks so emailed to ask what the difference was & if they were more difficult to turn. Got a very good reply so decided it was worth a shot. It is certainly worth it for me especially now I seem to have the problem of the chipped ends under control lol
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top