• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Lamenated segmented sheets

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,159
Location
Maidstone
First Name
mark
Yes, I have seen this in the UK.... I work with a school DT department, I can track down a supplier....
You could just use an Ali drinks can also:face:
Or guitar plectrums :thumbs::thumbs:
 

bigbob

Graduate Member
Joined
Oct 31, 2014
Posts
557
Location
Inverness
First Name
Bob
Hi Flexi thank you for your help I have made Celtic knot pens with just a coke can using a scroll saw but recently have been making Celtic knots with ebony and like the contrast especially if the body of the pen is made of a lighter colour like oak. I recently saw this video of a turner using this laminate and thought how much easier it seemed without having to laminate it yourself would be grateful if you could find a supplier. Good idea with the plectrums although it would be a conflict of interest here as I have 6 guitars to feed plectrums to:love_it:

How to make a Celtic knot pen blank. Start to finish. Woodturning - YouTube
 

Curly

Graduate Member
Joined
Nov 3, 2019
Posts
420
Location
RM of Aberdeen, Saskatchewan, Canada
First Name
Peter
Try looking for pick guard or scratchguard material from luthier suppliers. It can be had in 3 layer sheets. The only thing to watch for is sometimes the layers are not even thicknesses. IE Black, white, thin black. There has to be suppliers on your side of the water. WD® Custom Pickguards Material Details They are plastic throughout so if you want metal layers you'll have to make them. I have a piece of a sheet here somewhere and it is within a thou or two of a thin kerf table saw blade thick.

Pete
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,455
Location
Colebrooke, Devon
First Name
Phil
That's laminated sandwich board. Any sign maker will have some in stock, and you may even be able to get some offcuts from one of them.
 

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,301
Location
Somewhere in Staffordshire,
First Name
Eamonn.
Hi has anyone come across or purchased these sheets from a supplier in the UK I tried to order them from the USA but they want $34 for postage for 2 sheet worth $10 :-

Mr Dart has hit the nail on the head for you..

Have a look at this UK site, they sell laminated sheets for laser and CNC sign making.

I brought the sample swatch off them a couple of years ago to have a look at doing some laser cut signs. Never cantered that way in the end. Grandson played and cut up most of the samples or I would send you some. (The bits left wouldn’t have done a very slim slimline…:rolling: otherwise I would have been trying it.

External Laser Engraving Laminate

There is another supplier that I brought off that did double sided laminate, will have to drain my brain (or look through all my receipts :rolling) to see if I can find it for you. May not be for a few weeks as we have Christmas madness coming up and a few craft fairs as well.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top