• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Olive wood and resin.

Paul hd

Fellow
Joined
Jun 12, 2016
Posts
1,299
Location
Buckinghamshire
First Name
Paul
Hi All,
This was a project with H4H colours. The turning went well but unfortunately I couldn't get the pen mech working.
I will make up another blank and get another kit installed.

The Olive wood was an amazing wood to turn. I bought a few pieces from forum member Neil Lawton and they are great.

H4H Olive wood pen turning - YouTube
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Pain in the bum mate, with so much care and your design additions,a beaut piece of olive wood everything you could do has been done. Faulty clicks seem to be the order of the day with some kits. Personally I would stick with winding one piece kits.

Peter.
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,455
Location
Colebrooke, Devon
First Name
Phil
Beautiful result as always Paul. Such a shame the kit let you down. Can you not knock it apart and put a different mechanism in it?

Incidentally, at 4 1/2 inches, what was your technique for drilling it?
 

Paul hd

Fellow
Joined
Jun 12, 2016
Posts
1,299
Location
Buckinghamshire
First Name
Paul
Beautiful result as always Paul. Such a shame the kit let you down. Can you not knock it apart and put a different mechanism in it?

Incidentally, at 4 1/2 inches, what was your technique for drilling it?

Hi Phil,
That is an option but this incident got me thinking that I shouldn't be using a cheap kit for this item. I would not want someone to buy this at a charity do and 5 mins later it stops working.

The drilling I did on a pillar drill. It did wander a little but I still had plenty of Olive to turn.

Cheers,
Paul
 

neilhh

Apprentice Member
Joined
Jul 4, 2014
Posts
35
Location
Somerset
First Name
Neil
That's a great looking pen Paul, I have a lot to learn with this but may I ask....the tool you are using - is it a normal scraper? or something you have modified in some way?
 

Paul hd

Fellow
Joined
Jun 12, 2016
Posts
1,299
Location
Buckinghamshire
First Name
Paul
That's a great looking pen Paul, I have a lot to learn with this but may I ask....the tool you are using - is it a normal scraper? or something you have modified in some way?

Hi Neil,

The scraper is an old Sorby. It is standard I think. I don't have a sharpening jig so the end may have changed slightly. It is a easy tool to sharpen, wait for the sparks to come over the top and it is done.

Thanks to everyone for the comments.

Cheers,
Paul
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top