• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

What I have been playing at

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
I have not been posting much work lately so I thought I would show what I have been up to. I will not be showing much about this after all this is a pen turning site mainly.
As some of you also know before Christmas I treated myself to some nice new machines and now I have had time to play with them so I made two of a kind well at least two pieces of a project I have just started.

No prizes for guessing what it will be. Just out of interest these took me 5 days as I am learning the machines. They measure 18 5/8" long by 3" tall and are 1/8" thick.

I know a couple on here will appreciate this
 

Attachments

  • DSCF2159.jpg
    DSCF2159.jpg
    67.7 KB · Views: 181

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,301
Location
Somewhere in Staffordshire,
First Name
Eamonn.
Did you not see the photos of the new workshop just in case Look HERE and scroll down

Thank you Derek.

Nice to see it all set up, love the milling machine. Is that a CNC u it as well, difficult to zoom in and get a clear pic.

Been interested in milling machine ever since I got rid of the metal lathe.
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
No CNC for me Eamonn my poor brain would go into meltdown. Just a simple DRO which is what I used to get everything where it should be but a couple of the measurements were out by 0.0001":face:

I am enjoying playing with my new toys(tools)
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
I am still playing with the metal work toys. Some pictures at what I have been up to
 

Attachments

  • DSCF2184.jpg
    DSCF2184.jpg
    57.9 KB · Views: 120
  • DSCF2234.jpg
    DSCF2234.jpg
    37.5 KB · Views: 121

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
I try not to post much on this thread but I will add the odd bit now and again if that is alright by [MENTION=735]Phil Dart[/MENTION]

Due to other jobs not a lot on the loco but have managed to fix some parts together I know not a lot to look at.

I started by drilling 6 holes in each of the angle brackets and then riveted these to the buffer beams on the outside the rivets disappeared( well nearly just make out one of them) with a little draw filling and some wet and dry paper I have not brought these to a exceptional finish as I want a little roughness for the paint to adhere to so only done to 240 grit. Surprising how long this all took now to do the other end which the angle brackets are larger but only have 4 rivets in each.
 

Attachments

  • DSCF2260.jpg
    DSCF2260.jpg
    36.7 KB · Views: 101
  • DSCF2262.jpg
    DSCF2262.jpg
    33.4 KB · Views: 101

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
A few more bits to the metal pile:banana::banana::banana:

Besides this I have been waking the garden up after the winter planting seeds in the greenhouse digging the veg patch, digging and weeding the flower beds cutting grass and pruning roses which keep biting me.
 

Attachments

  • DSCF2290.jpg
    DSCF2290.jpg
    68.5 KB · Views: 77

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
As you can see a bit more done 6 axle blocks cut and slide in place six hornstays made drilled and fitted these stop the axle block falling out and another dry fit.
 

Attachments

  • DSCF2307.jpg
    DSCF2307.jpg
    60.7 KB · Views: 69
  • DSCF2319 (2).jpg
    DSCF2319 (2).jpg
    65.9 KB · Views: 69
  • DSCF2316.jpg
    DSCF2316.jpg
    76.3 KB · Views: 69

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
I have been busy Managed to get all six wheels prepared and most of the turning done on them, now all I need to do is turn the treads which is shown in the first photo. The chassis is now assembled ready for all the bits and pieces to be made, machined then fitted to that.

I have also been busy in the garden a quick walk around (Sorry for bad filming)

 

Attachments

  • DSCF2390.jpg
    DSCF2390.jpg
    53.7 KB · Views: 56
  • DSCF2382.jpg
    DSCF2382.jpg
    63.5 KB · Views: 54

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
As I said not posting much on this thread just the odd bits and pieces as it is really metalworking. I have been busy on this project and the crank pins are made as well as the motion plate.
 

Attachments

  • DSCF2433.jpg
    DSCF2433.jpg
    86.6 KB · Views: 46
  • DSCF2442.jpg
    DSCF2442.jpg
    86.2 KB · Views: 47

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Is going to be a working model Derek?

Sorry Bill missed this post yes it will be a working steam model.

A short update axles are now turned and ready to have the wheels fitted as are the eccentrics.

Things have slowed a bit as I am having to make some bits so that I can start making the connecting rods I need to be able to attach them to a rotary table and have had to make T Nuts and the other bits.
 

Attachments

  • DSCF2511.jpg
    DSCF2511.jpg
    73.4 KB · Views: 40

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
This is the set up I have been preparing as well as a connecting rod having been machined still in place



This is the first stage as can be seen two holes drilled and one end rounded. Still needs a taper milling from the rounded section up to a square section where the large hole is and also machining the two sides to thin the part.

This requires two of these I did have some problems mounting the piece on the rotary table but beat it into submission in the end. The next one will be easier as will the 4 coupling rods
 

Attachments

  • DSCF2527.jpg
    DSCF2527.jpg
    74.9 KB · Views: 32
  • DSCF2529.jpg
    DSCF2529.jpg
    48.5 KB · Views: 32
  • DSCF2531.jpg
    DSCF2531.jpg
    41.2 KB · Views: 32

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
I have finally finished the connecting rods and also quartered the wheels and fitted them
 

Attachments

  • DSCF2582.jpg
    DSCF2582.jpg
    43.1 KB · Views: 27
  • DSCF2585.jpg
    DSCF2585.jpg
    59.1 KB · Views: 27
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top