• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Difference Between Pen Blank Materials

Duncan A

Apprentice Member
Joined
May 12, 2020
Posts
6
Location
Northampton
First Name
Duncan
Hi Everyone
Finally ready to start getting into the pen-making a bit more fully and I thought I'd better get an idea of the pros and cons of the various blank materials.
I've got plenty of wood so can always try a variety of different species without worrying about wrecking them.
So, grateful if those more knowledgeable than me (all of you!) would advise on the pros and cons of the various plastic blanks.

Materials I've seen advertised and would like advice on machinability, finish etc:
Acrylic
Acrylate
Polyester
Casein
Ebonite
Are Kirin, Erinoid, Omas and similar brands really better than the cheaper acrylics in terms of finish and impact?
...and any other materials you think are worth commenting on.

For now, I'm keeping clear of the fancier stuff such as stone, embedded objects etc.

Thanks in advance
Duncan
 

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,146
Location
Maidstone
First Name
mark
The world is your lobster with turning..... Wood is good:thumbs::thumbs:
But if you think plastic is fantastic then it can be a bit baffling....
Most things can be turned but your right they can be very different, always sharp tools, small cuts and good speeds will see you right...
Acrylic can be brittle it depends on the amount of hardener or type used...... Acrylic Inlace is a real splinter one to watch... If your using sharp tools, you should also be producing long white ribbons which go everywhere and wrap around everything :rant:
Casein, ebonite and omas again nice and easy to turn but can be smelly as can horn and antler.....
My recommendation would be to try reputable blanks ie GPS or Kirinite or Axminster/ Turners Warehouse blanks, till your comfortable then you should have an idea where and what to buy from the pleather of home casters especially hybrid or watch part blanks.......
 

alpha1

Fellow
Joined
Mar 29, 2018
Posts
1,175
Location
middlesbrough
First Name
Dave
If you are just starting out I would buy some blanks from Axminster they are reasonably priced and usually easy to turn and finish.
I buy my blanks from a number of suppliers but they are not cheap one of my favourites is Pam Harris. The turners workshop is another I like Conway Stewart and Oma's blanks as well as some others. But like you when starting out I bought all sorts of stuff not knowing what I was doing and probably wasted a lot of money. So you are right to ask the question.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,340
Location
Canberra AUSTRALIA
First Name
Peter
Me I WOOD stick with your huge stock of it all the lessons you learn then put into practice on acrylic etc so often you will not always be told or tagged as to what type it is. Same with wood within the same species some are punky some like steel. Have fun try not to sweat the small stuff..Welcome.

Peter.
 

pittswood

Fellow
Joined
Mar 14, 2016
Posts
1,247
Location
Rhigos, South Wales
First Name
Kelvin
One cannot beat wood, every piece different in hardness, grain, colour and working to a finish that gives the wood that "wow" factor. My opinion!
Kelvin
 

fortress

Registered
Joined
Apr 11, 2016
Posts
5,178
Location
Astley
First Name
John
Wood is beautiful, there are many, many beautiful woods out there. I always finish with Melamine lacquer. I buy acrylic blanks I cast Epoxy resin blanks, easy to turn and great finish. I don’t turn or cast Polyester anymore, it can be brittle and unpredictable. As stated, your options are limitless. :thumbs::thumbs:
 

Bill Mooney

Blind old git
Grand Master
Joined
Aug 16, 2014
Posts
10,981
Location
County Durham
First Name
Bill
I must be odd as I like turning acrylics as much as timber. I developed my own style of turning & finishing which makes it easy. I always tell newbies to practice on pine. It’s cheap & plentiful. If you can turn pine then you can turn nearly anything & if it turns out well then you have a nice pen. The grain in pine can be quite pleasing, especially xcut grain. If you ruin it, it’s cheap enough to throw away. It’s better than ruining your more expensive blanks.
 

Duncan A

Apprentice Member
Joined
May 12, 2020
Posts
6
Location
Northampton
First Name
Duncan
Thanks gents,
I have a couple of Axminster blanks which I'll have a go on before splashing the cash, - and it certainly looks as if I should steer clear of polyester, initially at least.
I have turned a piece of, what sounds like acrylic, to make a small mushroom and found it easy enough but I didn't want to use the acrylic pen blanks on the "practice" slimline pens that I've got - I'll use wood on those.
I can't post pictures yet but will try and do so once I get going; probably not until next week though.
Duncan
 

Geoff Kent

Graduate Member
Joined
Feb 15, 2021
Posts
496
Location
Westcliff on Sea,Essex.
First Name
GEOFF
Personally speaking,I prefer wood.As John says there is so much beautiful timber out there waiting to be tried.Blanks cut from the same stock always has some variation from the adjoining blank.That is why wood is so unique.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top