Bucks
Fellow
This longer version of our Double Pen Blank Mould has been made to accommodate the growing range of pen kits which use longer tubes, you can get 2 projects out of one blank with kits such as razor handles and the new TM Athena, or you now can easily get 3 standard tubes such as Sierras from one blank without the usual waste. You can cast two matching blanks in one go, then saw down the centre, ideal for matching pen sets. We've also added an extra 3mm on the width for the kerf of the saw blade.
This mould would also be suitable for making knife scales, by filling the mould to the required level then slicing in half on a bandsaw, you can make matching bookends.
1 cavitiy @ 20mm x 43mm x 180mm.
The cavity requires approx 175ml of resin to fill line.
External Dimensions of mould - 75mm x 210mm x 35mm.
Note: internal height of the cavities are 25mm to prevent spillages and has a handy indicator line to enable you to fill to the right level.
www.penblanksandmoulds.co.uk/long-double-pen-blank-mould