• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Do you have to use Cellulose thinners or will white spirit or meths do?

reiddo

Full Member
Joined
Feb 10, 2021
Posts
78
Location
Hersham, Surrey
First Name
Douglas
Hi all,

I've just followed Phil's melamine instructions with good success, will post a pic shortly, but the only bit I wasn't able to follow 100% was using 2:1 thinned cellulose sanding sealer, as I didn't have thinners. Before I go and buy cellulose thinners, does it have to be that, or will white spirit or methylated spirits work?

Had a search through the forum and the default is cellulose thinners so I suspect I have my answer but thought I would check :-)

Cheers
Dougie
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,679
Location
Kent
First Name
Derek
Cellulose thinner is the correct one as it is compatible with the lacquer. best to stick with the correct one for the job. It is surprising how much your paint and finish cupboard fills up if you looked at mine it is totally packed with stains paints and finishes.
 

21William

Fellow
Joined
Jan 21, 2016
Posts
1,618
Location
Dorset
First Name
William
To dilute or not dilute cellulose sanding sealer is a contentious issue! One manufacturer suggests this should not be done. Another one sells it already pre-thinned. I’ve heard of folks using universal thinners as sold by Lidl and Aldi for sanding sealer as it’s very much less expensive. I wouldn’t use it though as I don’t like the smell. CSS isn’t cheap to start with so I’d always be inclined to use proper cellulose thinners. Quite why manufacturers feel the need to make so much profit on it is a bit disappointing. If you know anyone that works at a garage or specifically a body shop, they pay very much less than we do for it and may sell you the odd litre for a reasonable price?

3EB4BD10-2D0E-4D48-93E1-9C7E413AEAFC.jpg
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,455
Location
Colebrooke, Devon
First Name
Phil
You need cellulose thinners Dougie. I've always just used the Chestnut stuff, so I can't really comment on other makes, although I appreciate that on the face of it, some thinners are much cheaper. 500ml of the chestnut stuff lasts for ages though, unless you're gearing up your pen making to the levels of commercial output. You're only using 1 part thinners to 2 parts sealer, so a tin is going to make the equivalent of 1.5 litres of thinned sealer. That's a lot of sealer from a pen maker's perspective.
 

Bill Mooney

Blind old git
Grand Master
Joined
Aug 16, 2014
Posts
10,997
Location
County Durham
First Name
Bill
I use cellulose a gunwash from eBay. It works out about 12 for 5 litres & does the job ok. I’ve used it for years.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top