• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Resin and acrylic

Garno

Fellow
Joined
May 12, 2021
Posts
1,372
Location
Dronfield
First Name
Gary
Is there a difference between resin and acrylic?

Is one more brittle than the other? (I suspect that is the case)

Do we treat them the same whilst drilling and turning them?

Finally is it easy/possible to see the difference between acrylic and resin blanks just by looking at them? (Apart from those done by Mr Resin that has "Mr Resin" indented on one side:funny: )
 

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,159
Location
Maidstone
First Name
mark
Tbh I am not sure, I take it as a generic term.... There are soooooo many resins/ acrylics... Some require pressure pots to be bubble free, some don't, some have a thermal catalist ie generate heat when curing.... I honestly don't know enough about this other than I know what I like to turn....
You are correct that some blanks can be easier/softer to turn and produce wonderful white ribbons and then things like inlace are bullet hard and produce nothing more than dust and tiny fragments.....
All you can do is find what you like and try to stick with it:thinks::thinks:
 

Garno

Fellow
Joined
May 12, 2021
Posts
1,372
Location
Dronfield
First Name
Gary
Tbh I am not sure, I take it as a generic term.... There are soooooo many resins/ acrylics... Some require pressure pots to be bubble free, some don't, some have a thermal catalist ie generate heat when curing.... I honestly don't know enough about this other than I know what I like to turn....
You are correct that some blanks can be easier/softer to turn and produce wonderful white ribbons and then things like inlace are bullet hard and produce nothing more than dust and tiny fragments.....
All you can do is find what you like and try to stick with it:thinks::thinks:


Thanks for that Mark, I think those inlace are my least favourite but they do produce a great finish if you get that far without them breaking :sob:
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top