scouseroy
Graduate Member
I use the JPL 8060H from Maplins i clean for 20 mins and this model has a de-gas function,
use this for 10 mins to get rid of any tiny bubbles that are left this model also has a heater which i set at 40
degrees add catalyst stir in for 2-3 mins and pour. If i am casting in clear i use a dental vibrating table to release
any bubbles trapped under the tubes usually give this about 5 mins and any bubbles that float to the top
move to the side with a tooth pick. no problems. I use this method for my Feather, Fly and Feather and Watch part blanks.
Will post examples soon.
Steve.