geo
Full Member
I make the disk from a piece of corian 310mm , i make 4 holes and i placements in 15 cm faceplate of my lathe for more stability
![DSC01194.JPG DSC01194.JPG](https://penturners.co.uk/data/attachments/3/3816-1e79358f549e292cf5d29737da4981bf.jpg)
![DSC01195.JPG DSC01195.JPG](https://penturners.co.uk/data/attachments/3/3817-19f54e630f4053e51c0b5c0c6a9b69cd.jpg)
i make the base by mdf and i fix it with the lathe
the ''table'' of the base is also a corian
![DSC01196.JPG DSC01196.JPG](https://penturners.co.uk/data/attachments/3/3818-4ae141c111a0b74301d8a052068bf6dc.jpg)
all the table can rotate in any angle and any distance from the lathe and the face plate
![DSC01197.JPG DSC01197.JPG](https://penturners.co.uk/data/attachments/3/3819-274e412ffd3db3a4e9fe8a7ad42ca71a.jpg)
![DSC01198.JPG DSC01198.JPG](https://penturners.co.uk/data/attachments/3/3820-567ad1817512d9ae5ab58ac4c12b267e.jpg)
Regards
Giorgos
![DSC01194.JPG DSC01194.JPG](https://penturners.co.uk/data/attachments/3/3816-1e79358f549e292cf5d29737da4981bf.jpg)
![DSC01195.JPG DSC01195.JPG](https://penturners.co.uk/data/attachments/3/3817-19f54e630f4053e51c0b5c0c6a9b69cd.jpg)
i make the base by mdf and i fix it with the lathe
the ''table'' of the base is also a corian
![DSC01196.JPG DSC01196.JPG](https://penturners.co.uk/data/attachments/3/3818-4ae141c111a0b74301d8a052068bf6dc.jpg)
all the table can rotate in any angle and any distance from the lathe and the face plate
![DSC01197.JPG DSC01197.JPG](https://penturners.co.uk/data/attachments/3/3819-274e412ffd3db3a4e9fe8a7ad42ca71a.jpg)
![DSC01198.JPG DSC01198.JPG](https://penturners.co.uk/data/attachments/3/3820-567ad1817512d9ae5ab58ac4c12b267e.jpg)
Regards
Giorgos