• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Playing with hexagonal blanks

Pierre---

Full Member
Joined
Feb 3, 2016
Posts
231
Location
France
First Name
Pierre
Hi all!

For a Vertex, one hex kit from PSI, I choose a piece of hard wood that I turned a bit oversized. I drilled it, draw some lines and with a hand plane I made a nice hexagonal blank. Then I dipped it for 2 hours in boiling water. After having prepared a tube, I took the blank out of the water and immediately grabbed it at each end (that's the difficult moment, it's really hot), I turned my hands with as much power as I could, as if I wanted to wring out the blank. Before the wood came back to its original shape, I inserted the tube coated with thin CA. As you know it sets immediately, and the wood was petrified in the spiral shape. I am rather athletic View attachment 31270 , but I couldn't believe it, could you? :ciggrin:
View attachment 31267

To make half of this pair, I needed a hand (two hands actually) from a lefty friend, able to wring the wood in the opposite way, I can't do that:
View attachment 31268

I sometimes like to add some mother-of-pearl decoration:
View attachment 31269

C&C heartily welcome.
 

Buckeye

ペンメーカー
Executive Member
Joined
Oct 15, 2013
Posts
9,697
Location
UK
First Name
Peter
Hi all!

For a Vertex, one hex kit from PSI, I choose a piece of hard wood that I turned a bit oversized. I drilled it, draw some lines and with a hand plane I made a nice hexagonal blank. Then I dipped it for 2 hours in boiling water. After having prepared a tube, I took the blank out of the water and immediately grabbed it at each end (that's the difficult moment, it's really hot), I turned my hands with as much power as I could, as if I wanted to wring out the blank. Before the wood came back to its original shape, I inserted the tube coated with thin CA. As you know it sets immediately, and the wood was petrified in the spiral shape. I am rather athletic View attachment 31270 , but I couldn't believe it, could you? :ciggrin:
View attachment 31267



C&C heartily welcome.

I would expect those dark grain lines to twist as well.

Peter
 

stiofanpadraigcrafts

Graduate Member
Joined
Sep 13, 2015
Posts
408
Location
donegal
First Name
stephen
I'm with peter, i was expecting some kind of joke at the end of the post, but if you're trying to be serious then that's pretty stupid.
 

Terry Q

Fellow
Joined
Oct 8, 2014
Posts
3,849
Location
Roanoke, Illinois USA
First Name
Terry
This is a fantastic design. Very impressed. How much longer is the blank compared to its finished length? How do you keep the blank straight? Which wood works best?
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Love the pens in pic 2 not keen on the inserts. I enjoy hexes and at first sight when they came out made them in straight hex shape. Hans Christian Anderson has influenced your description.

Peter.
 

Pierre---

Full Member
Joined
Feb 3, 2016
Posts
231
Location
France
First Name
Pierre
Sure it was a joke, the first pic showing straight grain. :winking: I would add that I am the opposite of an athlete, and left-handed.
No pen wizard, but after drawing, rasps and files and sand paper. I wonder if the wizard is able to make the blank in the first and last pic. Any experience somebody?
Peter, what's it about Andersen?
 

Buckeye

ペンメーカー
Executive Member
Joined
Oct 15, 2013
Posts
9,697
Location
UK
First Name
Peter
Sure it was a joke, the first pic showing straight grain. :winking:

Not a very good one, if you had waited until red fish day it may have got a laugh:rolling:

No pen wizard, but after drawing, rasps and files and sand paper. I wonder if the wizard is able to make the blank in the first pic. Any experience somebody?
Peter, what's it about Andersen?

He wrote fairy tales too, but good ones:thumbs:

Peter
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Legacy used to make a hand operated Mill using a large (to me) Router mounted over a rail type bed that enabled a mandrel held pen blank . This was rotated in sync with exchangeable gears, hand wound to progress the cut, bit like a Pen Wizard on Steroids, every one ion my past has found them a semi nightmare and although I have I don,t use my Pen Wizard.

When I bought my Wizard I was horrified at so many aspects I modified it left right and yes centre. I rang the Designer owner of the company Beall who was disinterested in what I had done (I photographed and described all of this by E Mail to him and the IAP Forum where they had a Beall Section).

Anyway I designed and built my own Pen Mill to make hexes, I dont share this any more in this world anyone using my design if they ended up mutilated would sue the sox off me.

The Legacy enables Rope twist, Barley twist, Diamond pattern, square twist and hollow spirals. Their machine is known for noisy, dirty, loud. Pain in the bum to operate and clean, bit like mine.

With the now ever so common place threaded shafting etc necessity for C & C one day I will carry out that most vital replacement on the Beall Pen Wizard to me its biggest fail IMHO.

Loved seeing your efforts Pierre if you send me a pm I will check if France is on my cheap list to phone and have a yarn with you if you like.

Hans Christian Anderson was a Story Teller of great fame.

Peter.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
After my comments I phoned Pierre in France and complimented him on his hand skills for that is how his pens were made. This makes them stand out from the crowd in every way. Wonderful getting to know you Pierre.

I am so grateful for the heroes on this forum.

Recently I spent some time with my mate Ben who has gone away from making pens and incredible turned small and huge lathe work. He is now hardly able to cope with sales of his blanks for pens and knife scales. He stabilises as a professional with startling results. He was inspired to travel this way by a Knife Maker in our area where I hope to go back and do a pic essay of his timbers and workmanship.

We are in Wilmas birthday week (I nominated this for her 80th last Sunday), the family gave us a special pass to visit a famous attraction that covers so many acres, with a motorised unit to enable me to enjoy this visit coming up.

Peter.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top