Pressure Pot

[wm460]

What do you recommend Mark

Vic

These are the two that I use Vic, I mix the colour then add the catalyst then pour, wait 24 hr then remove from the mould.

Clear Casting Resin - 4kgs [281271-M] - $61.40 : Adelaide Moulding & Casting Supplies

https://www.google.com.au/url?sa=t&...Vdefs7Wtzt3-L2Bxw&sig2=WVltLgm5863Bb7JhwPQ_fg

 

[Grump]

Use a pre lubricated L shaped paddle to stir and never lift the bottom of it from the mix until finished.

Don't pour, transfer. Start with no bubbles and there are no bubbles to get rid of, no worries, simples init?

Think about what your doing and how you do it, it ain't rocket science and it don't gotta be expensive nor special equipment.

I ain't saying no more cos I don't want you doing it.

 

[Vic Perrin]

Here's me £15 Pressure Pot. Changed some of the fittings that are shown in the pics so that I could couple it up to my compressor.

Had to blank a couple of ports off and adjust the pressure relief valve. Pumped it up to 50 PSI and left it for 30 mins and there was no drop in pressure.

Just got to make a frame for moulds now.

 

[Jim]

They don't make them like that anymore Vic .. Its a beauty my friend ..

 

[Dalboy]

Nice find Vic look forward to see what blanks you can make ,that is after you have polished it first

 

[Buckeye]

It sounds great, I made my frames/carriers out of corian, looking forward to seeing the results.

Peter

 

[Vic Perrin]

Nice find Vic look forward to see what blanks you can make ,that is after you have polished it first

Thought about polishing it Derek but as the Antiques Experts say, "DONT TAKE OFF THE PATINA"

Vic

 

[Grump]

That's a good pot there Vic and a great price. well done on the bargain init?

 

[billyb_imp]

That pot looks like it should do the job Vic, just make sure you don't drop it onto your toes / foot

 

[wm460]

That certainly is a heavy duty pot.

 

[paulm]

That looks like just the job Vic, you'll be casting later on then?

 

[bassethound]

Blimey Vic that was a bargain mate!

 

[Vic Perrin]

That looks like just the job Vic, you'll be casting later on then?

Frames, moulds, Aluminite to be sorted Paul and exactly what I am going to cast. I intend to do just clear casting to start off so I need to decide what I am going to stick on the pen tubes

Vic

 

[Bill Mooney]

Best of luck Vic.

 

[Penpal]

Love it when a purchase comes together like that mate congratulations.

Peter.

 

[Indie Shed]

Nice one, Vic, time to increase the pressure!