Jim
Grand Master
- Joined
- Oct 19, 2011
- Posts
- 15,617
Over the last few days i have noticed that when bringing up the tailstock to the front of the headstock it was not running free, so i loosened the 4 cap screws holding the two alignment plates, this solved my problem. The problem after this was the alignment of the tail and head were out, but each time i tightened the cap screws after realigning the plates i ran back into my first issue of the tailstock being tight .... To cut it short it took me over two hours to solve the issue ... Day now gone, and still no pens turned since last weekend ... Some ready thou so i hope to be turning tomorrow, my holiday week is fast diminishing ...