• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

segmented

  1. alan morrison

    A pen and a blank

    The pen is S. American Bloodwood segmented, separated from dyed Tassie Oak ends with rings cut from an old Persil container. The blank is Pheasant Wood segmented with Box ends. Do you think that the dividers in the blank would be a better in a different colour than green? The green is a lot...
  2. alan morrison

    Phil's free gift

    The most generous Phil Somebody gave a free chrome Etesia kit recently.....here's mine. Bog Oak segmented and with aluminium dividing it from some acrylic stuff.
  3. TVS

    Snooker pens

    A selection of segmented snooker pens not a lover of the kit but a customer wanted them so here we are
  4. TVS

    Another segmented pen

    A simple but effective bit of fun segmenting
  5. TVS

    Segmented sierra

    A segmented Sierra made using corian and aluminium a very slow process avoiding heat buildup
  6. alan morrison

    Bog Oak

    Bog oak segmented on a Headwind.
  7. alan morrison

    Knurl GT

    Just a variation on a theme. I used Dibond sheeting at the ends of the segmented section.
  8. TVS

    Two new bowls

    Made these two bowls today ones 9” Bubinga the other a 5” square segmented bowl
  9. TVS

    Square segmented bowl

    Small segmented bowl just for fun
  10. alan morrison

    Etesia

    Segmented Etesia. Kit from Phil at Beaufort Ink.
  11. alan morrison

    Segmented Knurl

    Knurl GT dressed with segmented Beech, Mahogany and ebony veneers.
  12. alan morrison

    Segmented Etesia

    Etesia dressed with odds and sods.
  13. alan morrison

    Window Two

    Streamline in Mahogany segmented with beech.
  14. Pops92

    Pen Kit Brass Tube

    I am after a pen kit that will incorporate this segmented piece. It's just over 80mm long. Does anyone know of a UK pen kit with a tube that will accommodate the blank shown without me cutting away any of the segmented area? Was looking at the TM Epsilon but it's only 65mm
  15. E

    1st segmented

    This is my 1st segmented using my go to wood of beech and also I think a piece of a random mahogany.
  16. alan morrison

    Segmented Keltoi

    Recently completed Keltoi.
  17. Bucks

    Valentines 3D Printed Moulds & Blanks

    It’s been a while in the making, with a lot of expense & a fair bit of trial & error, but I think I’m about ready to throw my hat in the ring with 3d printed moulds. Starting with these valentines themed Sierra blanks which are £4.50 each for the empty mould (black or red) for you to fill with...
  18. angelo49

    Segmented Knurl GT

    Segmented Knurl GT Spalted Maple and Wenge
  19. angelo49

    Segmented Sierra

    Segmented Gold / Chrome Sierra Spalted Maple and Bloodwood
  20. alan morrison

    My first 2 segmented pens

    Just finished my first 2 segmented pen. I used guitar pickboard
Top