There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.
To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.
I had something similar to your symptoms Jed, so now when using CA for finishing i always where a face mask, if i am only gluing up a few pens i don't bother, if have quite a number to glue up i again place on the face mask ...
Thanks for the advice boys, epoxy may be the one i choose, but i will also get my self some cheap nose bags see if that does the trick, as i really like how the CA does the job.
Yikes Jed I just tried ca to seal a polymer blank for final machining......... it was like having chopped some chilli and rubbing your eyes...... whilst it worked i think I'll try epoxy brush fluid its expensive (£20.00 for 125 ml but needs very little) for my purposes as i'm not using it as a final finish
I only use 2 Part epoxy foe gluing up now, been experimenting with a few things to get away from CA.
Been wanting to try Rustin's Clear Plastic Coating.